Grade 50W Weathering Steel Coil
ASTM A588 Grade 50W high-strength weathering steel coil, 4.4 mm thick, 1,500 mm wide, yield 345+ MPa but qualifies via strength specs. Hot-rolled coils 7208.38.0015 despite weathering elements if nonalloy base. For corrosion-resistant structures.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If cold-rolled weathering grade
Cold-rolled versions of weathering steel use 7210 cold-rolled.
If assembled into equipment structures
Fabricated into structures like bridges moves to Chapter 73.
If classified as alloy due to elements
Weathering elements may qualify as alloy steel if exceeding nonalloy limits.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify copper/phos content doesn't trigger alloy heading; note weathering not further working; suitable for exposed bridge use
Related Products under HTS 7208.38.00.15
355 Yield High-Strength Machinery Steel Coil
Generic 355 MPa yield hot-rolled steel coil for industrial machinery, 3.3 mm gauge, 1,100 mm width, nonalloy high-strength per US note. Classifies 7208.38.0015 as hot-rolled coils 3-4.75 mm. Base material for frames and guards.
SM490A High-Strength Steel Coil
JIS G3106 SM490A hot-rolled coil, 4.1 mm thick, 1,550 mm wide, minimum yield 355 MPa qualifying high-strength steel. Meets 7208.38.0015 for non-worked hot-rolled coils. For Japanese building and welding applications.
High-Strength Steel Coil 3.5mm for Bridges
3.5 mm thick high-strength steel coil (yield 365 MPa), 1,250 mm wide, hot-rolled nonalloy for bridge fabrication. Precisely HTS 7208.38.0015 due to thickness and strength specs, in coils. Supports infrastructure durability.
E355C High-Strength Steel Coil
EN 10210 E355C hot-rolled coil, 3.7 mm thickness, 1,200 mm width, 355 MPa yield high-strength steel. 7208.38.0015 for uncoated hot-rolled coils in thickness range. Pipe manufacturing feedstock.
460 MPa High-Strength Steel Coil
Ultra-high-strength 460 MPa yield hot-rolled steel coil, 3.2 mm thick, 1,650 mm wide, nonalloy meeting US high-strength note. 7208.38.0015 classification for precise thickness/hot-rolled coils. Advanced engineering applications.
High-Strength Hot-Rolled Steel Coil HR450
Flat-rolled nonalloy steel coil, 3.5 mm thick and 1,200 mm wide, with minimum yield strength of 355 MPa, meeting high-strength steel definition per US note 72(a). Hot-rolled, in coils, not further worked, classified under 7208.38.0015 due to thickness between 3-4.75 mm. Used in structural automotive and machinery applications requiring enhanced strength.