Pickled Hot-Rolled Steel Coil for Automotive Panels 3.2mm
Pickled hot-rolled nonalloy steel coil, 3.2 mm thick, 1600 mm wide, used for manufacturing automotive body panels. Classified under HTS 7208.26.00.60 due to its hot-rolled, pickled state, coil form, specific thickness range, and width exceeding 600 mm without further working.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness 4.75 mm or more
Thicker hot-rolled pickled coils (4.75 mm+) move to 7208.27 subheading within the same series.
If alloy steel composition
If steel meets alloy definitions (e.g., specific Cr/Mo content), it shifts to Chapter 72 alloy steel headings.
If further worked like coated
Any coating, painting, or cladding after pickling constitutes 'further worked' per Chapter notes, moving to 7208.36.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include end-use statements if for automotive to support value but ensure classification based on physical specs
• Check for rust or discoloration; no duty allowance per Chapter 72 notes
• Document width precisely over 600 mm to distinguish from narrower products in 7211
Related Products under HTS 7208.26.00.60
Hot-Rolled Pickled Steel Coil HRPO 3.5mm x 1500mm
Hot-rolled pickled and oiled (HRPO) steel coil with thickness of 3.5 mm and width of 1500 mm, made from nonalloy steel, supplied in coil form. This product falls under HTS 7208.26.00.60 as it is flat-rolled, hot-rolled, pickled but not further worked beyond that, with thickness between 3 mm and 4.75 mm, and width over 600 mm.
HRP&O Steel Coil 3.8mm Thickness Construction Grade
Hot-rolled pickled and oiled (HRP&O) nonalloy steel coil, 3.8 mm thick by 1800 mm wide, suitable for structural construction components. Fits HTS 7208.26.00.60 as flat-rolled iron/nonalloy steel, hot-rolled only to pickled stage, in coils, precise thickness, not clad/plated/coated.
Nonalloy Steel HRPC 3.4mm x 1250mm Pickled Coil
Hot-rolled pickled coil (HRPC) of nonalloy steel, 3.4 mm thickness, 1250 mm width, for general fabrication. Under HTS 7208.26.00.60: hot-rolled, pickled, coiled, thickness 3-4.75 mm, width ≥600 mm, no further treatments.
Industrial HRPO Steel Coil 3.6mm for Pipe Manufacturing
HRPO nonalloy steel coil optimized for pipe production, 3.6 mm thick, 1400 mm wide, hot-rolled and pickled. Matches HTS 7208.26.00.60 criteria exactly: coil form, pickled surface, designated thickness band, broad width.
Commercial Quality Pickled Steel Coil 3.1mm x 1700mm
Commercial quality hot-rolled pickled steel coil, 3.1 mm gauge, 1700 mm width, nonalloy composition for sheet metal work. HTS 7208.26.00.60 applies to this hot-rolled, pickled, coiled product within exact thickness and width parameters.
Drawing Quality HRPC Steel Coil 3.9mm Thickness
Hot-rolled pickled coil (HRPC) drawing quality grade, 3.9 mm thick, 1550 mm wide, for deep drawing applications. Precisely fits HTS 7208.26.00.60: nonalloy, hot-rolled/pickled, coiled, 3-4.75 mm thick, >600 mm wide.