Nonalloy Steel HRPC 3.4mm x 1250mm Pickled Coil
Hot-rolled pickled coil (HRPC) of nonalloy steel, 3.4 mm thickness, 1250 mm width, for general fabrication. Under HTS 7208.26.00.60: hot-rolled, pickled, coiled, thickness 3-4.75 mm, width ≥600 mm, no further treatments.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness of 2.5 mm or more but under 3 mm
Slightly thinner range in pickled hot-rolled coils uses 7208.25 subheading.
If Cladding or metal/nonmetal coating moves to 7212 for hot-rolled clad products.
If silicon-electrical steel
If for electrical use with specific silicon content, classifies under 7226 alloy series.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Use calibrated gauges for thickness verification; small deviations can change subheading
• Label coils clearly with specs to prevent inspection delays
• Confirm not high-strength steel per note (a); yield point specs would reclassify
Related Products under HTS 7208.26.00.60
Hot-Rolled Pickled Steel Coil HRPO 3.5mm x 1500mm
Hot-rolled pickled and oiled (HRPO) steel coil with thickness of 3.5 mm and width of 1500 mm, made from nonalloy steel, supplied in coil form. This product falls under HTS 7208.26.00.60 as it is flat-rolled, hot-rolled, pickled but not further worked beyond that, with thickness between 3 mm and 4.75 mm, and width over 600 mm.
Pickled Hot-Rolled Steel Coil for Automotive Panels 3.2mm
Pickled hot-rolled nonalloy steel coil, 3.2 mm thick, 1600 mm wide, used for manufacturing automotive body panels. Classified under HTS 7208.26.00.60 due to its hot-rolled, pickled state, coil form, specific thickness range, and width exceeding 600 mm without further working.
HRP&O Steel Coil 3.8mm Thickness Construction Grade
Hot-rolled pickled and oiled (HRP&O) nonalloy steel coil, 3.8 mm thick by 1800 mm wide, suitable for structural construction components. Fits HTS 7208.26.00.60 as flat-rolled iron/nonalloy steel, hot-rolled only to pickled stage, in coils, precise thickness, not clad/plated/coated.
Industrial HRPO Steel Coil 3.6mm for Pipe Manufacturing
HRPO nonalloy steel coil optimized for pipe production, 3.6 mm thick, 1400 mm wide, hot-rolled and pickled. Matches HTS 7208.26.00.60 criteria exactly: coil form, pickled surface, designated thickness band, broad width.
Commercial Quality Pickled Steel Coil 3.1mm x 1700mm
Commercial quality hot-rolled pickled steel coil, 3.1 mm gauge, 1700 mm width, nonalloy composition for sheet metal work. HTS 7208.26.00.60 applies to this hot-rolled, pickled, coiled product within exact thickness and width parameters.
Drawing Quality HRPC Steel Coil 3.9mm Thickness
Hot-rolled pickled coil (HRPC) drawing quality grade, 3.9 mm thick, 1550 mm wide, for deep drawing applications. Precisely fits HTS 7208.26.00.60: nonalloy, hot-rolled/pickled, coiled, 3-4.75 mm thick, >600 mm wide.