Ferrochromium Granules 3-10mm 64% Cr
Crushed and screened ferrochromium granules sized 3-10mm with 64% Cr and 7% C, optimized for ladle additions. Under HTS 7202.49.50 as other ferrochromium in granular form, not further worked beyond crushing. Ensures rapid dissolution in secondary steelmaking.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If ferro silico-chromium
Silicon content >3% shifts to silicon-bearing chromium ferroalloy.
If welded into pipe fittings
Fabricated steel articles from ferroalloy become Chapter 73 products.
If incorporated into furnace parts
Parts of centrifuges/filters containing ferroalloy classified by function.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Screen analysis certificate mandatory; size fractions determine pricing and use
• Anti-dumping duties apply to certain origins—verify USTR country list
• No Chapter 72 rust allowance—use rust-preventive coatings on steel drums
Related Products under HTS 7202.49.50
High-Carbon Ferrochromium 65C
High-carbon ferrochromium containing approximately 65% chromium and 6-8% carbon, used primarily as an alloying additive in stainless steel production. It falls under HTS 7202.49.50 as ferrochromium that is neither low-carbon (under 0.5% C) nor charge chrome (over 55% Cr and 4-10% C). This granular or lump form alloy meets the 'other' specification in the ferrochromium subheading.
Medium-Carbon Ferrochrome 60-70% Cr
Ferrochromium alloy with 60-70% chromium and 1-4% carbon, supplied in lumps for metallurgical applications like specialty steel alloys. Classified under HTS 7202.49.50 as 'other' ferrochromium, excluding low-carbon and charge varieties. It provides chromium addition without excessive carbon pickup in melting processes.
Ferrochromium Lumps 65-70% Cr 6-8% C
Lump-form high-carbon ferrochromium with 65-70% Cr and 6-8% C, sized 10-100mm for furnace charging in stainless steelmaking. This product is specifically 'other' ferrochromium under HTS 7202.49.50, not qualifying as low-carbon or charge grade. Standard metallurgical grade for AOD/VOD refining processes.
Nitrided Ferrochromium 68% Cr
Nitrogen-bearing ferrochromium with 68% Cr, up to 0.2% N, and moderate carbon, used for nitrogen-alloyed stainless steels. Falls under HTS 7202.49.50 as other ferrochromium; nitrogen content doesn't alter base ferroalloy classification. Improves steel strength and corrosion resistance.
Extra High-Carbon Ferrochrome 70% Cr
Premium ferrochromium with 70% minimum chromium and extra-high carbon (8-10%), for high-chromium white iron castings. HTS 7202.49.50 'other' category captures this grade excluded from charge or low-carbon specs. Delivers maximum chromium recovery in foundry applications.
Standard Ferrochromium HCFeCr 60-66% Cr
Standard high-carbon ferrochromium (HCFeCr) with 60-66% Cr, 6-8.5% C, balance iron, in typical lump sizes. HTS 7202.49.50 covers this ubiquitous grade used globally for 300-series stainless production. Baseline alloy for chromium addition worldwide.