Gold-Clad Bronze Plate
Bronze plates (copper-tin) clad with gold on both faces for decorative architectural panels. Semi-manufactured under HTS 7109.00.00.00 as base metal clad with gold.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | 6% | +35.0% | 41% |
| š²š½Mexico | 6% | +10.0% | 16% |
| šØš¦Canada | 6% | +10.0% | 16% |
| š©šŖGermany | 6% | +10.0% | 16% |
| šÆšµJapan | 6% | +10.0% | 16% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If for silversmiths'/goldsmiths' wares
If cut for tableware/ornaments per note 10.
If base metal mountings with plating
Plated (not clad) hardware for buildings in Chapter 83.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Declare plate dimensions/surface area covered by gold cladding
ā¢ Architectural end-use may require origin marking exemptions
Related Products under HTS 7109.00.00.00
Gold-Clad Copper Foil
Thin copper foil (under 0.15mm) clad with gold on one side for flexible circuits and RF shielding. Qualifies for HTS 7109.00.00.00 as base metal clad with gold in semi-manufactured foil form, mechanically affixed per note 7.
Gold-Clad Copper Wire
Copper wire clad with a thin layer of gold through hot-rolling or similar mechanical means, supplied in coils for electrical applications. Classified under HTS 7109.00.00.00 as base metal (copper) clad with gold in semi-manufactured form, not further worked beyond basic shaping. Meets chapter note 7 definition of 'metal clad with precious metal'.
Gold-Clad Silver Sheet
Silver sheets mechanically clad with gold on one or both surfaces, used in electronics or decorative stamping, in thicknesses under 0.5mm. Fits HTS 7109.00.00.00 as silver (precious metal per note 1(a)) clad with gold in semi-manufactured unwrought form. Excludes mere plating per chapter note 6.
Gold-Clad Brass Strip
Brass (copper-zinc alloy) strips clad with gold via mechanical bonding, in widths up to 300mm for connector manufacturing. HTS 7109.00.00.00 covers base metals like brass clad with gold in semi-manufactured strip form, per definition excluding plated products.
Gold-Clad Silver Powder
Silver powder particles clad with gold, where 90%+ passes 0.5mm sieve, for conductive pastes in electronics. HTS 7109.00.00.00 includes silver clad with gold in powder form as semi-manufactured, per subheading note on powder definition.
Gold-Clad Copper Tube
Seamless copper tubes clad externally with gold for corrosion-resistant fittings in aerospace. Classified HTS 7109.00.00.00 as base metal clad with gold, semi-manufactured tube form not further worked.