Gold-Clad Silver Sheet
Silver sheets mechanically clad with gold on one or both surfaces, used in electronics or decorative stamping, in thicknesses under 0.5mm. Fits HTS 7109.00.00.00 as silver (precious metal per note 1(a)) clad with gold in semi-manufactured unwrought form. Excludes mere plating per chapter note 6.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | 6% | +35.0% | 41% |
| š²š½Mexico | 6% | +10.0% | 16% |
| šØš¦Canada | 6% | +10.0% | 16% |
| š©šŖGermany | 6% | +10.0% | 16% |
| šÆšµJapan | 6% | +10.0% | 16% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If unwrought silver without gold cladding
Unclad silver in semi-manufactured form stays in 7106; cladding with gold shifts to base/silver clad category.
If fashioned into jewelry articles
Once cut/stamped into rings or pendants, classified as gold/silver jewelry per note 9, not semi-manufactured.
If for goldsmiths' tableware blanks
If intended for utensils or ornaments beyond semi-manufactured, falls under articles of goldsmiths' wares.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Obtain metallurgical cross-section analysis to document cladding integrity and distinguish from plated silver under note 6
ā¢ Label shipments clearly as 'semi-manufactured clad forms' to prevent CBP confusion with finished goldsmiths' wares in 7114
Related Products under HTS 7109.00.00.00
Gold-Clad Copper Foil
Thin copper foil (under 0.15mm) clad with gold on one side for flexible circuits and RF shielding. Qualifies for HTS 7109.00.00.00 as base metal clad with gold in semi-manufactured foil form, mechanically affixed per note 7.
Gold-Clad Copper Wire
Copper wire clad with a thin layer of gold through hot-rolling or similar mechanical means, supplied in coils for electrical applications. Classified under HTS 7109.00.00.00 as base metal (copper) clad with gold in semi-manufactured form, not further worked beyond basic shaping. Meets chapter note 7 definition of 'metal clad with precious metal'.
Gold-Clad Brass Strip
Brass (copper-zinc alloy) strips clad with gold via mechanical bonding, in widths up to 300mm for connector manufacturing. HTS 7109.00.00.00 covers base metals like brass clad with gold in semi-manufactured strip form, per definition excluding plated products.
Gold-Clad Silver Powder
Silver powder particles clad with gold, where 90%+ passes 0.5mm sieve, for conductive pastes in electronics. HTS 7109.00.00.00 includes silver clad with gold in powder form as semi-manufactured, per subheading note on powder definition.
Gold-Clad Copper Tube
Seamless copper tubes clad externally with gold for corrosion-resistant fittings in aerospace. Classified HTS 7109.00.00.00 as base metal clad with gold, semi-manufactured tube form not further worked.
Gold-Clad Sterling Silver Rod
Sterling silver (92.5% Ag) rods clad with gold, drawn to 5mm diameter for jewelry wire stock. HTS 7109.00.00.00 for silver clad with gold in semi-manufactured rod/bar form.