LED Backlight Glass Strips
Float glass strips 13 cm wide, 2.6 mm thick, edges ground with non-reflecting layer per chapter note (c), for edge-lit LED panels. HTS 7006.00.10.00 for worked strips from 7005 glass.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If ≤2 mm thick
Thinner strips have separate subheading; thickness drives classification.
If stemware/tableware shaped
Worked into drinkware forms even if strip-like goes to glassware.
If optical flatness for prisms
Precision optical elements classify under optical chapters.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Coating specs must show microscopic thinness to retain 7006 status
• Declare as 'components only'—finished panels go to 8539/8541
Related Products under HTS 7006.00.10.00
Ground Edge Borosilicate Glass Strips
Borosilicate glass strips sourced from heading 7005, measuring 10 cm wide, 3 mm thick, with all longitudinal edges ground smooth for precision applications. These strips are edge-worked but not framed or fitted, fitting HTS 7006.00.10.00 due to their specific dimensions and processed edges from cast or rolled glass.
Precision Ground Soda-Lime Glass Strips
Soda-lime glass strips from heading 7005, 12 cm wide by 2.5 mm thick, with smoothed longitudinal edges for laboratory equipment fabrication. Classified under HTS 7006.00.10.00 as worked glass strips meeting exact dimensional and edge-processing criteria without further assembly.
Edge-Smoothed Float Glass Strips
Float glass strips from heading 7005, 14 cm width, 2.8 mm thickness, all longitudinal edges ground for LED lighting diffusers. Meets HTS 7006.00.10.00 as bent/edge-worked glass not over 15.2 cm wide from qualifying base glass.
High-Temp Ceramic Glass Strips
Ceramic-rolled glass strips from 7003, 7 cm wide, 5 mm thick, smoothed edges for furnace windows. Fits HTS 7006.00.10.00 as edge-worked thick strips.
Solar Panel Edge Glass Strips
Low-iron float glass strips 15 cm wide, 2.3 mm thick, longitudinal edges processed for PV module edging. HTS 7006.00.10.00 for qualifying worked glass strips.
Custom Optical Glass Strips
Optical crown glass strips from 7005, 5 cm wide, 3.5 mm thick, edges ground/polished for lens blanks. Meets all criteria for HTS 7006.00.10.00 worked strips.