Ground Edge Borosilicate Glass Strips
Borosilicate glass strips sourced from heading 7005, measuring 10 cm wide, 3 mm thick, with all longitudinal edges ground smooth for precision applications. These strips are edge-worked but not framed or fitted, fitting HTS 7006.00.10.00 due to their specific dimensions and processed edges from cast or rolled glass.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If unworked before annealing
Unprocessed float glass sheets over 10 mm thick stay in 7005 per chapter note (a); edge grinding constitutes 'worked' status.
If over 15.2 cm in width
Wider safety glass strips, even edge-worked, classify under 7007 multiple-walled insulating units or safety glass.
If framed or fitted with other materials
Adding frames or fittings changes from worked glass strips to glass paving blocks or similar articles.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify glass originates from headings 7003, 7004, or 7005 via supplier certificates to avoid reclassification
• Measure width ≤15.2 cm, thickness >2 mm, and confirm all longitudinal edges are ground/smoothed per subheading specs
• Avoid framing or fittings, as they shift to heading 7016; declare exact dimensions accurately
Related Products under HTS 7006.00.10.00
Precision Ground Soda-Lime Glass Strips
Soda-lime glass strips from heading 7005, 12 cm wide by 2.5 mm thick, with smoothed longitudinal edges for laboratory equipment fabrication. Classified under HTS 7006.00.10.00 as worked glass strips meeting exact dimensional and edge-processing criteria without further assembly.
Edge-Smoothed Float Glass Strips
Float glass strips from heading 7005, 14 cm width, 2.8 mm thickness, all longitudinal edges ground for LED lighting diffusers. Meets HTS 7006.00.10.00 as bent/edge-worked glass not over 15.2 cm wide from qualifying base glass.
High-Temp Ceramic Glass Strips
Ceramic-rolled glass strips from 7003, 7 cm wide, 5 mm thick, smoothed edges for furnace windows. Fits HTS 7006.00.10.00 as edge-worked thick strips.
Solar Panel Edge Glass Strips
Low-iron float glass strips 15 cm wide, 2.3 mm thick, longitudinal edges processed for PV module edging. HTS 7006.00.10.00 for qualifying worked glass strips.
Custom Optical Glass Strips
Optical crown glass strips from 7005, 5 cm wide, 3.5 mm thick, edges ground/polished for lens blanks. Meets all criteria for HTS 7006.00.10.00 worked strips.
Industrial Fused Silica Glass Strips
Fused silica strips (per chapter definition of glass) from heading 7005, 8 cm wide, 4 mm thick, longitudinal edges polished smooth for high-temperature applications. HTS 7006.00.10.00 applies to these edge-worked strips derived from worked sheet glass.