Automotive Cabin Air Filter Media
Nonwoven fabric made from polypropylene fibers, weighing 90 g/m², used as the filter media in car cabin air filters to capture dust and pollen. It falls under HTS 5603.93.00 as a nonwoven material in the specified weight range, impregnated with minimal adhesive for structure but not fully coated. This classification applies to uncoated nonwovens primarily for filtration purposes.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If weighing 25 g/m² or less
Lighter nonwovens for filtration shift to the lower weight category in the same heading.
If fully coated or laminated with visible plastics on both sides
Heavy plastic coating visible to naked eye moves it to plastic film/laminates in Chapter 39 per Chapter 56 notes.
If imported as complete assembled air filter
Finished filters are classified by function in Chapter 84, not as raw nonwoven material.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify exact weight per m² with lab testing to confirm 70-150 g/m² range and avoid reclassification to 5603.92 or 5603.94
• Provide mill test reports showing fiber composition and minimal impregnation to distinguish from plastic-coated products under Chapter 39
• Ensure documentation specifies end-use as filter media, not assembled filters, to prevent shifts to heading 8421
Related Products under HTS 5603.93.00
Surgical Drape Nonwoven Fabric
Sterile nonwoven SMS fabric weighing 120 g/m², used to produce surgical drapes for blocking fluids during operations. Classified under HTS 5603.93.00 as a nonwoven in the 70-150 g/m² range, with light meltblown layer for barrier properties but not exceeding coating exclusions. Ideal for medical applications requiring breathability and strength.
Battery Separator Nonwoven Sheet
Polypropylene nonwoven membrane weighing 80 g/m², serving as separators in lithium-ion batteries to prevent short circuits. HTS 5603.93.00 covers this as nonwoven material in the specified weight, with minimal coating invisible to naked eye. Essential for EV battery production.
Geotextile Filter Fabric Roll
Needlepunched polypropylene nonwoven weighing 110 g/m², used in civil engineering for soil filtration and drainage. Falls under HTS 5603.93.00 as other nonwovens 70-150 g/m², not reinforced or coated visibly. Supplied in large rolls for construction sites.
Facial Mask Filter Layer
Meltblown nonwoven fabric at 95 g/m², the critical filter layer in disposable face masks capturing viruses and particles. HTS 5603.93.00 applies to this weight range nonwoven, with bonding not forming visible plastic cover. Key component in PPE production.
Absorbent Benchtop Liner Nonwoven
Cellulosic-poly blend nonwoven sheet weighing 130 g/m² for lab benchtop spill absorption. Under HTS 5603.93.00 as nonwoven 70-150 g/m², lightly impregnated for absorbency without visible coating. Used in scientific and cleanroom environments.
Roofing Underlayment Nonwoven
Spunbond polypropylene nonwoven at 105 g/m², breathable barrier under roof shingles preventing moisture infiltration. HTS 5603.93.00 for 70-150 g/m² nonwovens, minimally treated without naked-eye visible coating. Standard in residential construction.