Viscose Staple Rayon Printcloth
Woven printcloth from viscose rayon synthetic staple fibers combined mainly with nylon man-made filaments, meeting printcloth specs: plain weave, square, 45-65 yarn number avg, under 170 g/m², >33 singles/cm². HTS 5515.91.0030 applies for these filament-mixed synthetic staple printcloths used in linings.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If coated for paper-like use, not textile
Paper-coated or impregnated fabrics may classify under Chapter 48 if function shifts from textile.
If yarn-dyed rather than printed, poplin type
Yarn-dyed poplins use 5516; printcloths are specifically piece-printed or plain per note.
If mainly cotton with minimal synthetic filaments
Predominantly cotton plain weave printcloth falls under 5208, not synthetic Chapter 55.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document filament vs staple ratio (>50% filament mix) to justify 'mainly with man-made filaments'
• Pair with dyeing records if printed, as printcloth allows pre/post printing
Related Products under HTS 5515.91.00.30
Polyester Staple Printcloth for Apparel
Lightweight printcloth fabric from polyester staple fibers mixed solely with polyester filaments, plain weave of square construction, 55 average yarn number, <170 g/m², >33 singles yarns/cm², not napped. Classed under 5515.91.0030 for its printcloth definition matching statistical note (c)(i) non-combed type.
Synthetic Blend Printcloth for Linings
Specialty printcloth blending polyester and acrylic staple fibers with filament yarns, plain weave, 60 yarn number avg, square with 40 ends/picks cm², 150 g/m². HTS 5515.91.0030 for mixed man-made filament printcloths used in jacket linings per note (c).
Napped Polyester Printcloth
Napped printcloth of polyester staple mainly mixed with filament, plain weave square construction allowed under note (c), 48 avg yarn number, <170 g/m², >33 singles/cm². 5515.91.0030 covers napped printcloths for soft-touch apparel interfaces.
Polyester-Cotton Printcloth Fabric
A plain weave printcloth fabric made from synthetic staple fibers mixed mainly with man-made filaments, weighing under 170 g/m², with 43-68 average yarn numbers and over 33 singles yarns per cm² in square construction. Certified as printcloth per HTS statistical notes (c), it falls under 5515.91.0030 due to its synthetic staple fiber content and filament mixing for printed textile applications.
Acrylic Filament Printcloth Sheeting
Printcloth of acrylic synthetic staple fibers woven mainly with man-made filament yarns, plain weave, square construction under 170 g/m², average yarn number 50-60, exceeding 33 singles picks/ends per cm². Meets HTS 5515.91.0030 as 'printcloth (626)' for lightweight printed apparel linings per statistical note (c).
Modacrylic Printcloth Fabric Roll
Printcloth in roll form from modacrylic staple fibers mixed with man-made filaments, plain weave square construction, average yarn 52, <170 g/m², 36 singles yarns/cm², non-cabled. Fits 5515.91.0030 as statistical printcloth (626) for fire-retardant apparel applications.