Napped Polyester Printcloth
Napped printcloth of polyester staple mainly mixed with filament, plain weave square construction allowed under note (c), 48 avg yarn number, <170 g/m², >33 singles/cm². 5515.91.0030 covers napped printcloths for soft-touch apparel interfaces.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If mixed with wool staple mainly plus filaments
Wool or animal hair staple bases use Chapter 51 headings.
If warp knit with similar printcloth appearance
Knitted fabrics, even printcloth-like, classify under Chapter 60.
If rubber- or plastics-coated for protective clothing
Coated textiles for technical uses move to Chapter 59.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Napping is permitted but document base weave meets printcloth weave density
• Avoid calling 'flannel'; specify printcloth to match HTS (626)
• Weight after napping must stay <170 g/m²; pre-nap test recommended
Related Products under HTS 5515.91.00.30
Polyester Staple Printcloth for Apparel
Lightweight printcloth fabric from polyester staple fibers mixed solely with polyester filaments, plain weave of square construction, 55 average yarn number, <170 g/m², >33 singles yarns/cm², not napped. Classed under 5515.91.0030 for its printcloth definition matching statistical note (c)(i) non-combed type.
Synthetic Blend Printcloth for Linings
Specialty printcloth blending polyester and acrylic staple fibers with filament yarns, plain weave, 60 yarn number avg, square with 40 ends/picks cm², 150 g/m². HTS 5515.91.0030 for mixed man-made filament printcloths used in jacket linings per note (c).
Polyester-Cotton Printcloth Fabric
A plain weave printcloth fabric made from synthetic staple fibers mixed mainly with man-made filaments, weighing under 170 g/m², with 43-68 average yarn numbers and over 33 singles yarns per cm² in square construction. Certified as printcloth per HTS statistical notes (c), it falls under 5515.91.0030 due to its synthetic staple fiber content and filament mixing for printed textile applications.
Acrylic Filament Printcloth Sheeting
Printcloth of acrylic synthetic staple fibers woven mainly with man-made filament yarns, plain weave, square construction under 170 g/m², average yarn number 50-60, exceeding 33 singles picks/ends per cm². Meets HTS 5515.91.0030 as 'printcloth (626)' for lightweight printed apparel linings per statistical note (c).
Viscose Staple Rayon Printcloth
Woven printcloth from viscose rayon synthetic staple fibers combined mainly with nylon man-made filaments, meeting printcloth specs: plain weave, square, 45-65 yarn number avg, under 170 g/m², >33 singles/cm². HTS 5515.91.0030 applies for these filament-mixed synthetic staple printcloths used in linings.
Modacrylic Printcloth Fabric Roll
Printcloth in roll form from modacrylic staple fibers mixed with man-made filaments, plain weave square construction, average yarn 52, <170 g/m², 36 singles yarns/cm², non-cabled. Fits 5515.91.0030 as statistical printcloth (626) for fire-retardant apparel applications.