Plastic Impregnated Bleached Chipboard for Furniture
Recycled bleached chipboard impregnated with plastic resins, 400 g/m² and 0.5 mm thick, sheets >36 cm side for furniture back panels. Fits HTS 4811.51.20: bleached, plastic-impregnated, heavy weight, large format, thick profile. Provides durability over uncoated chipboard.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thinner variant <0.3 mm
Identical composition but reduced caliper uses the paired subheading 4811.51.40.
If molded into finished furniture components
Molded or pressed paperboard articles classify in 4823.70, beyond flat stock.
If fiberboard with wood content >50%
Medium density fiberboard (MDF) with significant lignocellulosic binders shifts to Chapter 44 wood products.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Disclose recycled content and impregnation depth; full saturation may trigger plastics heading review
• Calibrate thickness across sheet—variations >0.05 mm common pitfall leading to average thickness disputes
• Pair with formaldehyde emission certs for furniture end-use compliance
Related Products under HTS 4811.51.20
Plastic-Coated Bleached Cardboard for Packaging Boxes
Bleached paperboard coated with polyethylene plastic on one side, weighing 250 g/m² and 0.4 mm thick, supplied in rolls over 15 cm wide for manufacturing rigid packaging boxes. It falls under HTS 4811.51.20 due to its bleached base, plastic coating (excluding adhesives), weight over 150 g/m², large format dimensions, and thickness of 0.3 mm or more. This classification applies to uncoated or printed sheets intended for conversion into boxes.
PE-Laminated Bleached Board for Food Trays
Bleached paperboard weighing 300 g/m², laminated with polyethylene for grease resistance, 0.35 mm thick, in sheets exceeding 36 cm x 15 cm for thermoforming food trays. Classified under HTS 4811.51.20 for its plastic impregnation/cover, bleached uniformity, high weight, specified size, and minimum thickness. Excludes adhesive-only coatings per heading terms.
Plastic-Coated Bleached Linerboard for Displays
Bleached kraftliner substitute paperboard, 220 g/m² with plastic surface cover for moisture protection, 0.32 mm thick in wide rolls for point-of-sale displays. Meets HTS 4811.51.20 as bleached, plastic-coated (non-adhesive), >150 g/m², roll width >15 cm, and ≥0.3 mm thickness. Differentiates from uncoated linerboard in 4804.
Vinyl Covered Bleached Paperboard for Binders
Bleached board weighing 260 g/m² covered with thin PVC vinyl film, 0.42 mm total thickness, in rolls >15 cm wide for ring binder covers. HTS 4811.51.20 due to plastic covering, bleaching, weight, size criteria, and thickness specs. Vinyl adds scuff resistance.
Extrusion-Coated Bleached SBS Board
Solid bleached sulfate (SBS) paperboard, 275 g/m² with LDPE extrusion coating, 0.36 mm thick in large sheets for pharmaceutical blister packaging bases. Meets all HTS 4811.51.20 criteria: bleached SBS plastic coated, heavy, sized correctly, thick enough. Superior cleanliness for pharma.
Plastic Surface-Decorated Bleached Folding Box Board
Bleached folding boxboard at 200 g/m² with printed plastic film surface decoration, 0.31 mm thick, rectangular sheets for cosmetics packaging. HTS 4811.51.20 as plastic surface-colored/decorated, bleached, >150 g/m², proper dimensions, thickness met. Printing subsidiary per chapter note.