Plastic-Coated Bleached Linerboard for Displays
Bleached kraftliner substitute paperboard, 220 g/m² with plastic surface cover for moisture protection, 0.32 mm thick in wide rolls for point-of-sale displays. Meets HTS 4811.51.20 as bleached, plastic-coated (non-adhesive), >150 g/m², roll width >15 cm, and ≥0.3 mm thickness. Differentiates from uncoated linerboard in 4804.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If uncoated kraftliner meeting burst strength
Uncoated kraftliner >115 g/m² with specified Mullen strength uses 4804.11, prior to plastic coating changing material composition.
If self-copy or tarred instead of plastic-coated
Tarred, bituminized, or self-copy coated paperboard (non-plastic) over 150 g/m² falls to 4811.41, excluding plastics.
If converted into finished display stands
Post-import conversion to articles like stands shifts from paperboard stock to 4823 other paper articles.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Confirm no kraft sulfate fiber dominance (≥80%) or it risks 4804 classification; request pulp process certification
• Measure unfolded sheet sizes precisely—must exceed 36x15 cm to avoid smaller format subheadings
• Label rolls clearly with thickness and weight to facilitate CBP inspection; pitfall is moisture-induced thickness variation
Related Products under HTS 4811.51.20
Plastic-Coated Bleached Cardboard for Packaging Boxes
Bleached paperboard coated with polyethylene plastic on one side, weighing 250 g/m² and 0.4 mm thick, supplied in rolls over 15 cm wide for manufacturing rigid packaging boxes. It falls under HTS 4811.51.20 due to its bleached base, plastic coating (excluding adhesives), weight over 150 g/m², large format dimensions, and thickness of 0.3 mm or more. This classification applies to uncoated or printed sheets intended for conversion into boxes.
PE-Laminated Bleached Board for Food Trays
Bleached paperboard weighing 300 g/m², laminated with polyethylene for grease resistance, 0.35 mm thick, in sheets exceeding 36 cm x 15 cm for thermoforming food trays. Classified under HTS 4811.51.20 for its plastic impregnation/cover, bleached uniformity, high weight, specified size, and minimum thickness. Excludes adhesive-only coatings per heading terms.
Plastic Impregnated Bleached Chipboard for Furniture
Recycled bleached chipboard impregnated with plastic resins, 400 g/m² and 0.5 mm thick, sheets >36 cm side for furniture back panels. Fits HTS 4811.51.20: bleached, plastic-impregnated, heavy weight, large format, thick profile. Provides durability over uncoated chipboard.
Vinyl Covered Bleached Paperboard for Binders
Bleached board weighing 260 g/m² covered with thin PVC vinyl film, 0.42 mm total thickness, in rolls >15 cm wide for ring binder covers. HTS 4811.51.20 due to plastic covering, bleaching, weight, size criteria, and thickness specs. Vinyl adds scuff resistance.
Extrusion-Coated Bleached SBS Board
Solid bleached sulfate (SBS) paperboard, 275 g/m² with LDPE extrusion coating, 0.36 mm thick in large sheets for pharmaceutical blister packaging bases. Meets all HTS 4811.51.20 criteria: bleached SBS plastic coated, heavy, sized correctly, thick enough. Superior cleanliness for pharma.
Plastic Surface-Decorated Bleached Folding Box Board
Bleached folding boxboard at 200 g/m² with printed plastic film surface decoration, 0.31 mm thick, rectangular sheets for cosmetics packaging. HTS 4811.51.20 as plastic surface-colored/decorated, bleached, >150 g/m², proper dimensions, thickness met. Printing subsidiary per chapter note.