Assembled Ponderosa Pine Fence Sections
Factory-assembled 6-foot ranch fence sections using sawn Ponderosa pine boards and rails, with wire mesh backing. Comprehensive HTS 4421.99.70 classification for complete assembled fencing units.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| đ¨đłChina | Free | +35.0% | 35% |
| đ˛đ˝Mexico | Free | +10.0% | 10% |
| đ¨đŚCanada | Free | +10.0% | 10% |
| đŠđŞGermany | Free | +10.0% | 10% |
| đŻđľJapan | Free | +10.0% | 10% |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If predominantly wire construction with wood framing
Wire mesh fencing with minimal wood becomes Chapter 73 article.
If knocked-down kit form
Unassembled components classify as other wood articles.
If heavy-duty corral panels over 2.5m
Livestock panels classify as construction joinery.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
⢠Weigh assembled sections to confirm nail/screw quantities for entry
⢠Brace panels diagonally during shipping to prevent racking
⢠Include galvanized wire specifications if mesh-backed
Related Products under HTS 4421.99.70
Sawn Pine Fence Pickets
These are rectangular wooden pickets made from sawn pine lumber, typically 1x6 inches in cross-section and 6 feet long, used for constructing privacy or picket fences. They fall under HTS 4421.99.70 as sawn pickets specifically designed for fencing applications, distinct from rough lumber in Chapter 44 heading 4407.
Cedar Fence Rails
Horizontal sawn cedar rails measuring approximately 2x4 inches by 8 feet, used as top and bottom rails in fence construction. Classified under HTS 4421.99.70 as sawn rails specifically for fencing, differentiated from general construction lumber by their profiled edges and fencing purpose.
Pressure-Treated Pine Fence Posts
6x6 inch square sawn pine posts, pressure-treated with CCA preservatives, typically 8 feet long with pointed ends for ground insertion. HTS 4421.99.70 covers these sawn posts designated for fencing, though treatment may affect precise subheading.
Redwood Picket Fence Sections
Pre-assembled fence panels consisting of sawn redwood pickets nailed to horizontal rails, measuring 6 feet high by 8 feet wide. Falls under HTS 4421.99.70 as assembled fence sections made from sawn wood components specifically for perimeter fencing.
Sawn Oak Garden Fence Palings
Tapered sawn oak palings, 1x4 inches at top tapering to 1x2 inches, 4 feet long for decorative garden fencing. HTS 4421.99.70 includes these sawn palings designed for low-profile boundary fences, distinguished by ornamental shaping.
Douglas Fir Split Rails
Traditional sawn-and-split Douglas fir rails, 4-6 inches diameter, 10 feet long for rustic ranch fencing. Although partially split, the sawn processing qualifies under HTS 4421.99.70 as fencing rails.