Sawn Pine Fence Pickets
These are rectangular wooden pickets made from sawn pine lumber, typically 1x6 inches in cross-section and 6 feet long, used for constructing privacy or picket fences. They fall under HTS 4421.99.70 as sawn pickets specifically designed for fencing applications, distinct from rough lumber in Chapter 44 heading 4407.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| đ¨đłChina | Free | +35.0% | 35% |
| đ˛đ˝Mexico | Free | +10.0% | 10% |
| đ¨đŚCanada | Free | +10.0% | 10% |
| đŠđŞGermany | Free | +10.0% | 10% |
| đŻđľJapan | Free | +10.0% | 10% |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If imported as rough, unworked lumber
Rough coniferous wood in the form of sawn pickets may classify under heading 4407 as lumber rather than finished fencing articles.
If pressure-treated with preservatives
Chemically treated wooden pickets shift to other wood articles subheading due to surface modification beyond simple sawing.
If assembled into complete panels exceeding 1.85m in length
Fully assembled fence sections larger than specified dimensions fall under assembled posts and beams in 4418.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
⢠Verify wood species and ensure sawn dimensions meet picket specifications to avoid reclassification as dimension lumber under 4407
⢠Obtain phytosanitary certificates proving heat treatment (ISPM 15) for wooden fencing components to clear customs
⢠Label bundles clearly with HTS code, dimensions, and treatment markings to prevent inspection delays
Related Products under HTS 4421.99.70
Cedar Fence Rails
Horizontal sawn cedar rails measuring approximately 2x4 inches by 8 feet, used as top and bottom rails in fence construction. Classified under HTS 4421.99.70 as sawn rails specifically for fencing, differentiated from general construction lumber by their profiled edges and fencing purpose.
Pressure-Treated Pine Fence Posts
6x6 inch square sawn pine posts, pressure-treated with CCA preservatives, typically 8 feet long with pointed ends for ground insertion. HTS 4421.99.70 covers these sawn posts designated for fencing, though treatment may affect precise subheading.
Redwood Picket Fence Sections
Pre-assembled fence panels consisting of sawn redwood pickets nailed to horizontal rails, measuring 6 feet high by 8 feet wide. Falls under HTS 4421.99.70 as assembled fence sections made from sawn wood components specifically for perimeter fencing.
Sawn Oak Garden Fence Palings
Tapered sawn oak palings, 1x4 inches at top tapering to 1x2 inches, 4 feet long for decorative garden fencing. HTS 4421.99.70 includes these sawn palings designed for low-profile boundary fences, distinguished by ornamental shaping.
Douglas Fir Split Rails
Traditional sawn-and-split Douglas fir rails, 4-6 inches diameter, 10 feet long for rustic ranch fencing. Although partially split, the sawn processing qualifies under HTS 4421.99.70 as fencing rails.
Western Red Cedar Posts
Sawn 4x4 inch Western red cedar posts, 10 feet long with chamfered corners for shadowbox fencing. HTS 4421.99.70 covers these sawn fence posts valued for natural decay resistance without chemical treatment.