Teak Marine Grade Plywood
Water-resistant plywood featuring teak (nonconiferous) outer veneers bonded with waterproof glue, supplied bare to show natural teak figure and texture. Fits HTS 4412.92.31.70 for other plywood with nonconiferous ply, no obscuring surface cover. Used in boat building and marine applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If at least one ply is tropical wood like teak throughout
Any tropical wood layer anywhere in construction moves to 4412.31.
If shaped specifically as wooden doors or door frames
Finished door products classify under joinery heading 4418, not plywood sheets.
If containing over 6mm thick wood sheets of uniform composition
Thick solid wood sheet laminates use different subheading than thin-ply plywood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include boil test certifications proving Type 1 waterproof glue bond for marine use
• Declare core species; tropical hardwood cores may trigger different subheadings
• Watch for insect quarantine treatments required for teak imports from certain countries
Related Products under HTS 4412.92.31.70
Oak Face Plywood Panel 4x8 Sheet
A 3/4-inch thick plywood sheet measuring 4 feet by 8 feet with an outer ply of oak (nonconiferous hardwood) and inner layers of mixed wood. This plywood is not surface-covered or coated with anything that obscures the natural oak grain, texture, or markings, fitting HTS 4412.92.31.70 as other plywood with at least one nonconiferous outer ply. Commonly used for cabinetry and furniture making.
Birch Exterior Plywood Sheathing
Structural plywood panels with birch (nonconiferous) face and back veneers, designed for exterior sheathing applications but without obscuring surface treatments. Meets HTS 4412.92.31.70 criteria for other plywood with nonconiferous outer ply, no grain-obscuring coverings. Used in construction framing and siding underlayment.
Mahogany Veneer Core Plywood
High-quality plywood with genuine mahogany outer plies over poplar core, maintained in natural finish without paints or laminates obscuring the wood grain. Classified under HTS 4412.92.31.70 as other nonconiferous plywood not surface-covered. Ideal for fine furniture and interior paneling.
Walnut Decorative Plywood Panels
Premium 5x10 foot plywood panels featuring book-matched walnut veneers on both faces, untreated surface preserving the rich walnut figuring. Classified HTS 4412.92.31.70 as other plywood with nonconiferous outer ply, no obscuring coverings. Used for architectural wall paneling and high-end furniture.
Cherry Hardwood Plywood 3/4-inch
Three-quarter inch plywood with select cherry outer plies exhibiting natural color variation and grain, supplied with transparent protective coating only. Precisely matches HTS 4412.92.31.70 for other nonconiferous plywood maintaining visible wood characteristics. Popular for custom cabinetry.
Poplar Cabinet Plywood 1/2-inch
Half-inch plywood sheets with poplar hardwood face and back veneers over softwood core, finished clear to display poplar grain patterns. Meets precise HTS 4412.92.31.70 definition for other nonconiferous plywood without grain-obscuring surfaces. Standard for kitchen cabinets and millwork.