Oak Face Plywood Panel 4x8 Sheet
A 3/4-inch thick plywood sheet measuring 4 feet by 8 feet with an outer ply of oak (nonconiferous hardwood) and inner layers of mixed wood. This plywood is not surface-covered or coated with anything that obscures the natural oak grain, texture, or markings, fitting HTS 4412.92.31.70 as other plywood with at least one nonconiferous outer ply. Commonly used for cabinetry and furniture making.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If surface-covered with opaque veneer or laminate
Surface coverings that obscure grain move to 4412.94, while clear coatings stay in 4412.92.
If imported as pre-cut builder's joinery panels
Finished joinery products like pre-cut cabinet panels fall under Chapter 44 heading 4418.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify formaldehyde emission compliance with EPA TSCA Title VI standards; provide CARB Phase 2 certification
• Document exact wood species and ply composition to confirm nonconiferous outer ply classification
• Avoid misclassification as particleboard by ensuring crossbanded veneer plies rather than uniform particle layers
Related Products under HTS 4412.92.31.70
Birch Exterior Plywood Sheathing
Structural plywood panels with birch (nonconiferous) face and back veneers, designed for exterior sheathing applications but without obscuring surface treatments. Meets HTS 4412.92.31.70 criteria for other plywood with nonconiferous outer ply, no grain-obscuring coverings. Used in construction framing and siding underlayment.
Mahogany Veneer Core Plywood
High-quality plywood with genuine mahogany outer plies over poplar core, maintained in natural finish without paints or laminates obscuring the wood grain. Classified under HTS 4412.92.31.70 as other nonconiferous plywood not surface-covered. Ideal for fine furniture and interior paneling.
Teak Marine Grade Plywood
Water-resistant plywood featuring teak (nonconiferous) outer veneers bonded with waterproof glue, supplied bare to show natural teak figure and texture. Fits HTS 4412.92.31.70 for other plywood with nonconiferous ply, no obscuring surface cover. Used in boat building and marine applications.
Walnut Decorative Plywood Panels
Premium 5x10 foot plywood panels featuring book-matched walnut veneers on both faces, untreated surface preserving the rich walnut figuring. Classified HTS 4412.92.31.70 as other plywood with nonconiferous outer ply, no obscuring coverings. Used for architectural wall paneling and high-end furniture.
Cherry Hardwood Plywood 3/4-inch
Three-quarter inch plywood with select cherry outer plies exhibiting natural color variation and grain, supplied with transparent protective coating only. Precisely matches HTS 4412.92.31.70 for other nonconiferous plywood maintaining visible wood characteristics. Popular for custom cabinetry.
Poplar Cabinet Plywood 1/2-inch
Half-inch plywood sheets with poplar hardwood face and back veneers over softwood core, finished clear to display poplar grain patterns. Meets precise HTS 4412.92.31.70 definition for other nonconiferous plywood without grain-obscuring surfaces. Standard for kitchen cabinets and millwork.