Okoume Plywood Panel 3.0mm x 1.2m x 2.2m
Marine-grade thin plywood featuring okoume (nonconiferous) outer plies, exact max dimensions of 3.0mm x 1.2m x 2.2m. Falls under HTS 4412.92.31.50 as other plywood with nonconiferous face, no obscuring surface cover. Used in boat building and humid environments.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If outer plies classified as tropical wood (okoume sometimes debated)
Tropical nonconiferous species like okoume may qualify for 4412.31 subheading.
If surface-covered with opaque paint or veneer obscuring grain
Surface-covered panels move to 4412.99 regardless of dimensions.
If made with bamboo outer plies per Chapter 44 note
Bamboo considered 'wood' but may fall under 4418 for specific laminated types.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide glue line certification (e.g
• WBP phenolic) to confirm plywood integrity
• Measure panels precisely before entry - exceeding any dimension shifts to 4412.92.31.00
• Lacey Act declaration required for species identification and legality verification
Related Products under HTS 4412.92.31.50
Poplar Plywood Panel 3.5mm x 1.1m x 2.0m
Thin plywood panel made with outer plies of nonconiferous poplar wood, core of mixed hardwood veneers, measuring 3.5mm thick, 1.1m wide, and 2.0m long. Classified under HTS 4412.92.31.50 due to its dimensions not exceeding the specified limits and at least one outer ply of nonconiferous wood without surface covering that obscures the grain. Commonly used for cabinet backs and furniture components.
Birch Face Plywood Sheet 3.2mm x 1.0m x 1.8m
High-quality thin plywood with birch (nonconiferous) face ply and poplar core, dimensions 3.2mm thickness, 1.0m width, 1.8m length. Meets HTS 4412.92.31.50 specs for small-format panels not surface-covered or with transparent finish preserving wood grain. Ideal for decorative shelving and millwork.
Mixed Hardwood Plywood Panel 2.8mm x 1.15m x 2.1m
Economical thin plywood featuring mixed nonconiferous hardwoods (alder, poplar) on outer plies, 2.8mm x 1.15m x 2.1m. Qualifies for HTS 4412.92.31.50 as small-format, grain-visible panels. Suited for underlayment and craft projects.
Alder Veneer Plywood 3.4mm x 1.05m x 1.95m
Premium thin plywood with red alder (nonconiferous) outer veneer ply over poplar core, sized 3.4mm thick, 1.05m wide, 1.95m long. HTS 4412.92.31.50 applies to these compact panels with visible grain texture. Used in high-end cabinetry faces.
Basswood Plywood Backing Panel 3.1mm x 0.8m x 2.0m
Lightweight thin plywood using basswood (nonconiferous) outer plies, 3.1mm x 0.8m x 2.0m dimensions. Fits HTS 4412.92.31.50 for narrow furniture backing panels with natural wood surface. Common in mirror and picture frame backs.
European Beech Plywood Panel 2.5mm x 1.1m x 1.7m
Select thin plywood with European beech (nonconiferous) face and back plies, compact 2.5mm x 1.1m x 1.7m size. HTS 4412.92.31.50 designation for grain-exposed small panels. Applied in musical instrument bodies and fine joinery.