Birch Face Plywood Sheet 3.2mm x 1.0m x 1.8m
High-quality thin plywood with birch (nonconiferous) face ply and poplar core, dimensions 3.2mm thickness, 1.0m width, 1.8m length. Meets HTS 4412.92.31.50 specs for small-format panels not surface-covered or with transparent finish preserving wood grain. Ideal for decorative shelving and millwork.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If one outer ply is coniferous (pine) and other nonconiferous
4412.92.32 covers mixed outer plies; both nonconiferous stays in .31.
If density exceeds 0.5 g/cm³ and primarily fiber-based rather than veneer
Medium density fiberboard (MDF) classification under 4411 if not true plywood.
If sold as individual nonconiferous wood veneers, not laminated
Unworked or roughly squared veneer sheets fall under Chapter 44 heading 4408.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include mill test certificate showing veneer thickness and species for CBP verification
• Avoid common pitfall of declaring as 'MDF' - this is veneered plywood, not fiberboard
• Check for ISPM 15 heat treatment marking if wooden packaging used in shipment
Related Products under HTS 4412.92.31.50
Poplar Plywood Panel 3.5mm x 1.1m x 2.0m
Thin plywood panel made with outer plies of nonconiferous poplar wood, core of mixed hardwood veneers, measuring 3.5mm thick, 1.1m wide, and 2.0m long. Classified under HTS 4412.92.31.50 due to its dimensions not exceeding the specified limits and at least one outer ply of nonconiferous wood without surface covering that obscures the grain. Commonly used for cabinet backs and furniture components.
Okoume Plywood Panel 3.0mm x 1.2m x 2.2m
Marine-grade thin plywood featuring okoume (nonconiferous) outer plies, exact max dimensions of 3.0mm x 1.2m x 2.2m. Falls under HTS 4412.92.31.50 as other plywood with nonconiferous face, no obscuring surface cover. Used in boat building and humid environments.
Mixed Hardwood Plywood Panel 2.8mm x 1.15m x 2.1m
Economical thin plywood featuring mixed nonconiferous hardwoods (alder, poplar) on outer plies, 2.8mm x 1.15m x 2.1m. Qualifies for HTS 4412.92.31.50 as small-format, grain-visible panels. Suited for underlayment and craft projects.
Alder Veneer Plywood 3.4mm x 1.05m x 1.95m
Premium thin plywood with red alder (nonconiferous) outer veneer ply over poplar core, sized 3.4mm thick, 1.05m wide, 1.95m long. HTS 4412.92.31.50 applies to these compact panels with visible grain texture. Used in high-end cabinetry faces.
Basswood Plywood Backing Panel 3.1mm x 0.8m x 2.0m
Lightweight thin plywood using basswood (nonconiferous) outer plies, 3.1mm x 0.8m x 2.0m dimensions. Fits HTS 4412.92.31.50 for narrow furniture backing panels with natural wood surface. Common in mirror and picture frame backs.
European Beech Plywood Panel 2.5mm x 1.1m x 1.7m
Select thin plywood with European beech (nonconiferous) face and back plies, compact 2.5mm x 1.1m x 1.7m size. HTS 4412.92.31.50 designation for grain-exposed small panels. Applied in musical instrument bodies and fine joinery.