Hem-Fir Underlayment Plywood 1/2 Inch
1/2-inch plywood panels with Hem-Fir (hemlock-fir mix) coniferous outer veneers, tongue-and-groove edges for flooring underlayment. No grain-obscuring surface treatment applied. Classified in 4412.59.8000 as other not surface-covered coniferous plywood.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If pre-machined with dadoes/rabbets for flooring assembly
Profiled flooring assemblies classify as ceramic/beaded floor coverings joinery.
If particleboard core with thick face veneers
Particleboard panels with wood veneers fall under Chapter 44 particle board.
If other wood species outer plies like eucalyptus/poplar
Non-coniferous plantation species move to 4412.99 other plywood category.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document T&G edge specifications; affects classification if considered profiled
• Provide species mix certification for Hem-Fir; unmixed hemlock may use different subheading
• Check sanded vs unsanded faces; excessive sanding risks veneer classification
Related Products under HTS 4412.59.80.00
SPF Pine Plywood 3/4 Inch 4x8 Sheet
Standard plywood panel made with both outer plies of SPF (spruce-pine-fir) coniferous wood, core of softwood veneers, measuring 3/4 inch thick by 4x8 feet. Not surface-covered or covered only with transparent finish preserving wood grain and texture. Classifies under 4412.59.8000 as coniferous plywood, other than blockboard/laminboard/battenboard.
Douglas Fir Exterior Sheathing Plywood
Structural plywood for exterior wall sheathing with Douglas fir coniferous face and back veneers, waterproof glue, and no opaque surface covering. Grain and markings remain visible through any clear sealant. Falls under 4412.59.8000 as other coniferous plywood not surface-covered obscuring texture.
Radiata Pine CDX Plywood Panel
CDX grade plywood with Radiata pine coniferous outer plies, suitable for construction subflooring and roofing, 5/8 inch thick. Surface has no covering or only transparent sealer showing wood grain pattern. Meets HTS 4412.59.8000 for other coniferous plywood.
Lodgepole Pine Utility Plywood
Utility grade plywood sheathing with lodgepole pine coniferous face and back veneers, 15/32 inch thickness for general construction. Clear or no surface coating preserves natural wood markings. HTS 4412.59.8000 applies to this other coniferous plywood.
Sitka Spruce Aircraft Grade Plywood
High-quality Sitka spruce coniferous plywood for aircraft and marine applications, with consistent outer plies and no opaque coverings. Grain texture fully visible for strength assessment. Fits 4412.59.8000 as specialty coniferous plywood, other.
Ponderosa Pine Pallet Base Plywood
Heavy-duty 3/4-inch plywood cut for pallet decking and bases, Ponderosa pine coniferous outer veneers, untreated surface. Natural wood grain exposed without coverings. Classifies under HTS 4412.59.8000 other coniferous plywood.