Eucalyptus Laminboard Panel 20mm
Laminboard constructed with eucalyptus (nonconiferous) face veneers over layered core strips, suited for high-end furniture and decorative millwork. Falls under HTS 4412.52.4100 as 'other' plywood with nonconiferous outer ply. Known for durability and smooth finish.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If with coniferous outer plies like hemlock
Heading specifies coniferous vs nonconiferous outer surfaces.
If imported as coniferous lumber, not assembled laminboard
Unlaminated wood in rectangular form classifies under sawn timber heading.
If density exceeds 0.8 g/cm³ after compression
Densified wood with nonconiferous outer plies moves to heading 4411.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Source from certified sustainable forests (FSC) to meet buyer demands and avoid Lacey Act issues
• Document layer count and veneer thickness; thin outer plies risk reclassification
• Check for ISPM-15 heat treatment stamp to bypass fumigation delays
Related Products under HTS 4412.52.41.00
Poplar Plywood Panel 18mm
A plywood panel consisting of multiple layers with outer plies made from nonconiferous poplar wood, used for furniture construction and cabinetry. It falls under HTS 4412.52.4100 as blockboard, laminboard, or battenboard plywood with at least one outer ply of nonconiferous wood, classified as 'other' plywood. The core is typically softwood strips glued between face veneers.
Birch Face Plywood Sheet 12mm
Plywood sheet with birch (nonconiferous) veneer on at least one outer face, laminated over a core of softwood battens, ideal for interior paneling and shelving. Classified under HTS 4412.52.4100 for 'other' plywood in blockboard/laminboard/battenboard with nonconiferous outer ply. Meets standard thickness for construction applications.
Aspen Battenboard Plywood 15mm
Battenboard plywood featuring aspen (nonconiferous) outer plies over narrow softwood strips, commonly used for subflooring and structural applications. HTS 4412.52.4100 covers this as 'other' plywood with nonconiferous outer ply in the blockboard category. Provides strength with lightweight properties.
Acacia Outer Ply Blockboard 25mm
Heavy-duty blockboard with acacia (nonconiferous) outer plies sandwiching solid core blocks, used in heavy furniture and shop fitting. HTS 4412.52.4100 for other plywood types with nonconiferous surfaces. Offers superior screw-holding strength.
Basswood Plywood for Cabinetry 10mm
Thin basswood (nonconiferous) faced plywood for cabinet doors and drawer fronts, featuring laminboard construction. Under HTS 4412.52.4100 as other plywood with nonconiferous outer ply. Paint-grade surface ideal for finishing.
Gum Plywood Structural Panel 3/4 Inch
Structural plywood with sweetgum (nonconiferous) outer plies rated for load-bearing applications per APA standards. HTS 4412.52.4100 covers this battenboard-style plywood with nonconiferous faces. Exposed-grade for construction sheathing.