Acacia Outer Ply Blockboard 25mm
Heavy-duty blockboard with acacia (nonconiferous) outer plies sandwiching solid core blocks, used in heavy furniture and shop fitting. HTS 4412.52.4100 for other plywood types with nonconiferous surfaces. Offers superior screw-holding strength.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If for blockboard with coniferous block cores and outer plies
Coniferous classification applies when outer plies match coniferous definition.
If pre-cut and edged for specific door construction
Cellular wood panels or headed/tongued doors classify under 4418.
If further worked with profiles or beads
Other worked wood articles beyond basic plywood fall in heading 4421.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide cross-section photos or samples showing blockboard construction vs standard plywood
• Comply with CITES if acacia species listed; obtain non-CITES declaration
• Insure against warp claims by specifying flatness tolerances in contracts
Related Products under HTS 4412.52.41.00
Poplar Plywood Panel 18mm
A plywood panel consisting of multiple layers with outer plies made from nonconiferous poplar wood, used for furniture construction and cabinetry. It falls under HTS 4412.52.4100 as blockboard, laminboard, or battenboard plywood with at least one outer ply of nonconiferous wood, classified as 'other' plywood. The core is typically softwood strips glued between face veneers.
Birch Face Plywood Sheet 12mm
Plywood sheet with birch (nonconiferous) veneer on at least one outer face, laminated over a core of softwood battens, ideal for interior paneling and shelving. Classified under HTS 4412.52.4100 for 'other' plywood in blockboard/laminboard/battenboard with nonconiferous outer ply. Meets standard thickness for construction applications.
Aspen Battenboard Plywood 15mm
Battenboard plywood featuring aspen (nonconiferous) outer plies over narrow softwood strips, commonly used for subflooring and structural applications. HTS 4412.52.4100 covers this as 'other' plywood with nonconiferous outer ply in the blockboard category. Provides strength with lightweight properties.
Eucalyptus Laminboard Panel 20mm
Laminboard constructed with eucalyptus (nonconiferous) face veneers over layered core strips, suited for high-end furniture and decorative millwork. Falls under HTS 4412.52.4100 as 'other' plywood with nonconiferous outer ply. Known for durability and smooth finish.
Basswood Plywood for Cabinetry 10mm
Thin basswood (nonconiferous) faced plywood for cabinet doors and drawer fronts, featuring laminboard construction. Under HTS 4412.52.4100 as other plywood with nonconiferous outer ply. Paint-grade surface ideal for finishing.
Gum Plywood Structural Panel 3/4 Inch
Structural plywood with sweetgum (nonconiferous) outer plies rated for load-bearing applications per APA standards. HTS 4412.52.4100 covers this battenboard-style plywood with nonconiferous faces. Exposed-grade for construction sheathing.