Share:|Follow us on LinkedIn

40mm Spruce Plywood Panel

Plywood panel made from multiple thin sheets of spruce wood, each ply not exceeding 6mm thick, with both outer plies being coniferous spruce. Not surface-covered or covered only with transparent material that reveals the wood grain. Classified under 4412.39.40 as other coniferous plywood without obscuring surface coverings.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳China8%+35.0%43%
🇲🇽Mexico8%+10.0%18%
🇨🇦Canada8%+10.0%18%
🇩🇪Germany8%+10.0%18%
🇯🇵Japan8%+10.0%18%

More Specific Codes

This product may fall under a more specific subheading:

4412.39.40.11Rough, or touch sanded for sizing purposes, but not further processed
→
4412.39.40.12Fully sanded on at least one face, but not further processed
→
4412.39.40.19Other
→
4412.39.40.31Rough, or touch sanded for sizing purposes, but not further processed
→
4412.39.40.32Fully sanded on at least one face, but not further processed
→
4412.39.40.39Other
→
4412.39.40.51Rough, or touch sanded for sizing purposes, but not further processed
→
4412.39.40.52Fully sanded on at least one face, but not further processed
→
4412.39.40.59Other
→
4412.39.40.61Rough, or touch sanded for sizing purposes, but not further processed
→
4412.39.40.62Fully sanded on at least one face, but not further processed
→
4412.39.40.69Other
→

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

4412.39Same rate: 43%

If containing bamboo in any ply

Plywood with bamboo sheets falls under specific bamboo subheading regardless of outer plies.

4412.31Lower: 18% vs 43%

If both outer plies are tropical hardwood

Classification shifts to tropical wood outer plies heading when coniferous not dominant.

4418Lower: 13.2% vs 43%

If sold as finished builder's joinery panels

Assembled into doors, windows or similar joinery moves to Chapter 44 heading 4418.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Get AI-powered classificationCalculate exact duty

Import Tips & Compliance

• Verify all plies are wood sheets ≤6mm and outer plies are coniferous via mill certificates

• Ensure no opaque surface coverings; transparent finishes must not obscure grain patterns

Related Products under HTS 4412.39.40

Pine Marine-Grade Plywood Sheet

Water-resistant plywood constructed from pine veneers, each ≤6mm thick, featuring coniferous pine outer plies with minimal surface treatment. Meets 4412.39.40 criteria for unsurfaced or transparently coated coniferous plywood. Used in boat building and humid environments.

Douglas Fir Utility Plywood

Utility-grade plywood from Douglas fir veneers, all plies ≤6mm, outer plies coniferous with no obscuring surface cover. Designed for general construction and sheathing applications. Meets exact 4412.39.40 definition for other coniferous plywood.

Hem-Fir Structural Plywood

Engineered plywood from mixed hemlock-fir stands, all wood plies ≤6mm with coniferous outer plies per 4407.14 definition. Surface natural or transparent sealed. Perfect match for HTS 4412.39.40 specifications.

Scots Pine Underlayment Plywood

Smooth underlayment plywood from Scots pine veneers ≤6mm thick, coniferous outer plies with clear factory sand and seal. Designed for flooring substructure. Classifies under 4412.39.40 other coniferous plywood.

12mm Radiata Pine Plywood

Structural plywood panel from New Zealand radiata pine, consisting solely of wood plies ≤6mm each, both faces coniferous. Surface is natural or clear-coated to show grain texture. Fits 4412.39.40 as other non-obscured coniferous plywood.

Larch Exterior Plywood Sheathing

Exterior-grade sheathing plywood made from larch wood plies (each ≤6mm), featuring coniferous larch outer faces with clear protective coating. No grain-obscuring surfaces present. Classified precisely under HTS 4412.39.40.