Fully sanded on at least one face, but not further processed
Plywood, veneered panels and similar laminated wood: > Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness: > Other, with both outer plies of coniferous wood: > Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply: > Other > Other: > Fully sanded on at least one face, but not further processed
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Except as provided in headings 9903.88.13, 9903.88.18, 9903.88.33, 9903.88.34, 9903.88.35, 9903.88.36, 9903.88.37, 9903.88.38, 9903.88.40, 9903.88.41, 9903.88.43, 9903.88.45, 9903.88.46, 9903.88.48, 9903.88.56, 9903.88.64, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(e) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(f)
Products classified under HTS 4412.39.40.62
Fully Sanded Pine Plywood Panel 4x8 ft
This plywood panel consists solely of coniferous wood sheets, each ply not exceeding 6mm thick, with both outer plies made from pine. It is fully sanded on at least one face to provide a smooth surface ready for finishing, but not further processed beyond sanding. Classified under 4412.39.4062 due to its coniferous outer plies, lack of surface covering that obscures grain, and sanding on one face.
Sanded Spruce Exterior Plywood Sheathing
Sanded spruce plywood sheathing made from multiple coniferous wood plies ≤6mm thick, with spruce outer faces, fully sanded on the exterior face for smooth application. Not surface-covered or further processed, preserving natural grain visibility. Fits 4412.39.4062 as coniferous plywood sanded on one face without additional manufacturing.
Sanded Douglas Fir Structural Plywood
Structural plywood panels constructed from Douglas fir coniferous sheets, each ≤6mm, fully sanded on one face for construction use, with no surface covering obscuring the wood grain. Both outer plies are coniferous, and no further processing applied post-sanding. Meets exact criteria of HTS 4412.39.4062 for sanded coniferous plywood.
Sanded Hem-Fir Underlayment Plywood
Plywood underlayment featuring Hem-Fir (mixed hemlock-fir) coniferous plies all ≤6mm thick, fully sanded on the top face for flooring preparation, transparent surface only if any. Not further processed, maintaining classification under 4412.39.4062 for its specific sanding and coniferous composition.
Sanded S-P-F Cabinet Back Plywood
Thin plywood sheets from S-P-F (spruce-pine-fir) mixed coniferous stands, all plies ≤6mm, fully sanded on one face for use as cabinet backs, with no obscuring surface cover. Qualifies for 4412.39.4062 as other sanded coniferous plywood not further worked.
Sanded Cedar Closet Lining Plywood
Aromatic cedar plywood from western red cedar coniferous plies all ≤6mm, fully sanded on one face for closet lining to release natural scent, no grain-obscuring cover or further work. Classified in 4412.39.4062 for sanded coniferous plywood characteristics.
Sanded White Fir Subfloor Plywood
Subfloor plywood using white fir coniferous veneers ≤6mm per ply, sanded on the upper face for adhesive bonding, both outer plies coniferous with visible grain, not further processed. Directly matches HTS 4412.39.4062 specifications.
Sanded Larch Utility Plywood Sheet
Utility-grade plywood sheets from larch coniferous wood, all plies ≤6mm thick, fully sanded on one face for general construction, transparent coating only if present. No further manufacturing, aligning with 4412.39.4062 for other sanded coniferous plywood.
Sanded Engelmann Spruce Formwork Plywood
Formwork plywood panels of Engelmann spruce coniferous plies ≤6mm, sanded smooth on contact face for concrete pouring, grain visible, no additional processing. Precisely under 4412.39.4062 as fully sanded one-face coniferous plywood.
Sanded Lodgepole Pine Wall Panel Plywood
Plywood panels of lodgepole pine coniferous wood sheets ≤6mm ply thickness, sanded smooth on the visible face for interior wall applications, preserving grain texture without further processing. Both outer plies coniferous, fitting 4412.39.4062 precisely.