Sanded Cedar Closet Lining Plywood
Aromatic cedar plywood from western red cedar coniferous plies all ≤6mm, fully sanded on one face for closet lining to release natural scent, no grain-obscuring cover or further work. Classified in 4412.39.4062 for sanded coniferous plywood characteristics.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If pre-drilled for mounting hardware
Assembled shutter/closet components classify as 4418.40 joinery.
If S-P-F species mix
S-P-F sawn/laminated wood under 4407.13 per subheading note.
If pallet construction with plywood top
Pallets incorporating this plywood shift to 4415.20.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Highlight natural aroma properties in descriptions but confirm no additives
• Provide kiln-drying certificates showing no further processing steps
• Watch for reclassification if cut to standard closet dimensions
Related Products under HTS 4412.39.40.62
Fully Sanded Pine Plywood Panel 4x8 ft
This plywood panel consists solely of coniferous wood sheets, each ply not exceeding 6mm thick, with both outer plies made from pine. It is fully sanded on at least one face to provide a smooth surface ready for finishing, but not further processed beyond sanding. Classified under 4412.39.4062 due to its coniferous outer plies, lack of surface covering that obscures grain, and sanding on one face.
Sanded Spruce Exterior Plywood Sheathing
Sanded spruce plywood sheathing made from multiple coniferous wood plies ≤6mm thick, with spruce outer faces, fully sanded on the exterior face for smooth application. Not surface-covered or further processed, preserving natural grain visibility. Fits 4412.39.4062 as coniferous plywood sanded on one face without additional manufacturing.
Sanded Douglas Fir Structural Plywood
Structural plywood panels constructed from Douglas fir coniferous sheets, each ≤6mm, fully sanded on one face for construction use, with no surface covering obscuring the wood grain. Both outer plies are coniferous, and no further processing applied post-sanding. Meets exact criteria of HTS 4412.39.4062 for sanded coniferous plywood.
Sanded Hem-Fir Underlayment Plywood
Plywood underlayment featuring Hem-Fir (mixed hemlock-fir) coniferous plies all ≤6mm thick, fully sanded on the top face for flooring preparation, transparent surface only if any. Not further processed, maintaining classification under 4412.39.4062 for its specific sanding and coniferous composition.
Sanded S-P-F Cabinet Back Plywood
Thin plywood sheets from S-P-F (spruce-pine-fir) mixed coniferous stands, all plies ≤6mm, fully sanded on one face for use as cabinet backs, with no obscuring surface cover. Qualifies for 4412.39.4062 as other sanded coniferous plywood not further worked.
Sanded White Fir Subfloor Plywood
Subfloor plywood using white fir coniferous veneers ≤6mm per ply, sanded on the upper face for adhesive bonding, both outer plies coniferous with visible grain, not further processed. Directly matches HTS 4412.39.4062 specifications.