Touch Sanded Pine Plywood Sheet
Laminated plywood sheet composed entirely of pine wood plies ≤6mm thick, featuring coniferous pine on both exterior faces. Touch sanded solely for dimensional accuracy, remaining rough without additional finishing or coverings. Fits 4412.39.4061 for its basic processing and coniferous outer ply construction.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If ≥5 plies total
Statistical suffix distinguishes ply count; 5+ plies uses .4016 while <5 uses .4061 under same heading.
If plies exceed 6mm thickness
Thicker plies classify as fiberboard or different plywood types under 4411, based on maximum ply dimension.
If surface-covered with opaque film
Transparent grain coverings stay in 4412.39; any obscuring surface shifts to 4412.94 blockboard category.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide detailed lamination records showing ply count and thickness compliance; label moisture content if >20%
• Avoid common pitfall of declaring as 'finished' if only sized
• Check for softwood species restrictions in destination markets
Related Products under HTS 4412.39.40.61
Rough Spruce Plywood Panel
Plywood panel made solely from spruce sheets, each ply not exceeding 6mm thick, with both outer plies of coniferous spruce wood. It is rough or touch sanded only for sizing purposes, with no further processing or surface covering that obscures the wood grain. Classified under 4412.39.4061 due to its coniferous outer plies and minimal processing state.
Rough Fir Plywood for Construction
Construction-grade plywood using fir wood sheets laminated together, each ≤6mm, with fir coniferous veneers on both outer surfaces. Supplied rough or minimally touch sanded for size control only, preserving natural wood texture. Meets 4412.39.4061 criteria for unfinished coniferous plywood.
SPF Rough Plywood Panel
Plywood panel from Spruce-Pine-Fir mixed coniferous wood, all plies ≤6mm thickness with SPF outer faces. Rough surfaced or touch sanded for sizing, no further manufacture applied. Classified in 4412.39.4061 as other unfinished coniferous plywood per chapter definitions.
Hem-Fir Touch Sanded Plywood
Mixed Hemlock-Fir coniferous plywood with all wood plies ≤6mm, outer plies Hem-Fir per subheading definitions. Touch sanded only for thickness control, remaining in rough state without surface coverings. Qualifies for 4412.39.4061 as basic coniferous plywood.
Rough Larch Plywood Sheet
Plywood sheet laminated from larch coniferous wood veneers, each ply max 6mm thick with larch outer surfaces. Rough or touch sanded for sizing purposes exclusively, no additional processing. Falls under 4412.39.4061 for unfinished coniferous plywood panels.
Cedar Core Rough Plywood
Multi-ply plywood featuring cedar coniferous wood throughout, ≤6mm per sheet, outer plies cedar. Provided rough or minimally touch sanded for accurate sizing only. Precisely matches 4412.39.4061 for non-surface-covered coniferous plywood.