Cedar Core Rough Plywood
Multi-ply plywood featuring cedar coniferous wood throughout, ≤6mm per sheet, outer plies cedar. Provided rough or minimally touch sanded for accurate sizing only. Precisely matches 4412.39.4061 for non-surface-covered coniferous plywood.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If mixed with broadleaf inner plies
Classification based on outer plies only; non-coniferous outer faces go to 4412.29.
If imported as assembled table tops
Plywood formed into finished articles like tabletops moves to 4419.
If very thick single coniferous sheets
Sheets >6mm or not laminated classify as sawn coniferous lumber.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Confirm cedar as coniferous species with CITES docs if applicable; measure cross-sections for ply compliance
• Avoid moisture damage in transit declarations
Related Products under HTS 4412.39.40.61
Rough Spruce Plywood Panel
Plywood panel made solely from spruce sheets, each ply not exceeding 6mm thick, with both outer plies of coniferous spruce wood. It is rough or touch sanded only for sizing purposes, with no further processing or surface covering that obscures the wood grain. Classified under 4412.39.4061 due to its coniferous outer plies and minimal processing state.
Touch Sanded Pine Plywood Sheet
Laminated plywood sheet composed entirely of pine wood plies ≤6mm thick, featuring coniferous pine on both exterior faces. Touch sanded solely for dimensional accuracy, remaining rough without additional finishing or coverings. Fits 4412.39.4061 for its basic processing and coniferous outer ply construction.
Rough Fir Plywood for Construction
Construction-grade plywood using fir wood sheets laminated together, each ≤6mm, with fir coniferous veneers on both outer surfaces. Supplied rough or minimally touch sanded for size control only, preserving natural wood texture. Meets 4412.39.4061 criteria for unfinished coniferous plywood.
SPF Rough Plywood Panel
Plywood panel from Spruce-Pine-Fir mixed coniferous wood, all plies ≤6mm thickness with SPF outer faces. Rough surfaced or touch sanded for sizing, no further manufacture applied. Classified in 4412.39.4061 as other unfinished coniferous plywood per chapter definitions.
Hem-Fir Touch Sanded Plywood
Mixed Hemlock-Fir coniferous plywood with all wood plies ≤6mm, outer plies Hem-Fir per subheading definitions. Touch sanded only for thickness control, remaining in rough state without surface coverings. Qualifies for 4412.39.4061 as basic coniferous plywood.
Rough Larch Plywood Sheet
Plywood sheet laminated from larch coniferous wood veneers, each ply max 6mm thick with larch outer surfaces. Rough or touch sanded for sizing purposes exclusively, no additional processing. Falls under 4412.39.4061 for unfinished coniferous plywood panels.