Longleaf Pine Underlayment Plywood
Underlayment-grade plywood using longleaf pine (Pinus palustris) for both face and back plies ≤6mm thick, untreated or transparently sealed. Specific southern pine composition qualifies for HTS 4412.39.4039.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If made with bamboo sheets
Chapter note excludes bamboo from general wood plywood headings.
If surface-covered previous, now if metal-faced
Metal surface coverings change classification entirely.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Ensure moisture content documentation under 19% for import clearance
• Label panels clearly with species and dimensions per PS1 standards
• Separate from bamboo plywood which follows different chapter note rules
Related Products under HTS 4412.39.40.39
Southern Yellow Pine Plywood Panel
Plywood panel made solely from sheets of coniferous wood, with both outer plies of southern yellow pine (Pinus taeda) and each ply not exceeding 6 mm thick. Not surface-covered or covered only with transparent material that preserves the wood grain. Falls under 4412.39.4039 due to specific southern pine outer ply and lack of opaque covering.
Loblolly Pine Utility Plywood Sheathing
Construction-grade plywood sheathing with both outer plies of loblolly pine (Pinus taeda), plies ≤6mm thick, no surface covering or only clear coating. Classified in 4412.39.4039 for southern yellow pine group and untreated surface.
Slash Pine Structural Plywood
Structural plywood sheets featuring slash pine (Pinus elliottii) as both outer plies, each ≤6mm, uncovered or with grain-preserving clear coat. Meets 4412.39.4039 criteria for southern pine plywood without surface obscuration.
Shortleaf Pine CDX Plywood
CDX exposure-rated plywood with shortleaf pine (Pinus echinata) outer plies, plies not over 6mm, plain surface or clear protected. 4412.39.4039 applies due to southern pine designation and surface requirements.
Pitch Pine Furniture Grade Plywood
Furniture component plywood with pitch pine (Pinus rigida) outer veneers, all plies ≤6mm, clear finish only. Classified 4412.39.4039 for specified coniferous southern pine without grain-obscuring cover.
Virginia Pine Wall Paneling Plywood
Thin plywood wall paneling sheets with Virginia pine (Pinus virginiana) both outer plies ≤6mm, natural grain exposed or UV clear coated. Meets precise 4412.39.4039 for southern pine group.