Douglas Fir Sanded Shelf Board Plywood 11/32 Inch
Thin 11/32 inch plywood shelf boards with Douglas fir coniferous outer plies ≤6mm thick, fully sanded on one face for shelving, no obscuring coverings or further work. Standard product under HTS 4412.39.4012 for its precise matching specs.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If outer ply is Sitka spruce
Sitka-specific subheading in the coniferous sanded plywood series.
If cut to length and tongue-grooved for shelves
Profiled or worked edges classify as other worked wood articles.
If bamboo plies used instead of wood
Bamboo-specific plywood heading per chapter note on woody materials.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Mark panels 'Made in [Country]' durably as required for wood products
• Test for CARB Phase 2 emissions if destined for California markets
Related Products under HTS 4412.39.40.12
Douglas Fir Utility Plywood Sheathing 1/2 Inch
Utility-grade plywood sheathing made from sheets of Douglas fir veneers, each ≤6mm thick, with both outer plies coniferous Douglas fir, fully sanded on one face for improved adhesion but not further worked. The natural wood grain remains visible as it lacks opaque coverings. Classified under HTS 4412.39.4012 for its Douglas fir composition and minimal processing.
Douglas Fir Construction Plywood 19/32 Inch Sanded
19/32 inch thick construction plywood with Douglas fir face and back veneers ≤6mm, fully sanded on at least one face for structural use, no additional surface treatments obscuring the coniferous grain. Fits precisely under HTS 4412.39.4012 as specified Douglas fir sanded plywood.
Douglas Fir Sanded Plywood Panel 3/4 Inch
This plywood panel consists solely of thin wood sheets with both outer plies made from coniferous Douglas fir wood, fully sanded on at least one face for a smooth finish but not further processed. Each ply is not exceeding 6 mm thick, and it is not surface-covered with anything that obscures the wood grain. It falls under HTS 4412.39.4012 due to the specific Douglas fir outer ply and sanding specification.
Douglas Fir Cabinet Grade Plywood 5/8 Inch
Cabinet-grade plywood featuring Douglas fir outer plies from thin wood sheets ≤6mm each, fully sanded on one face to a smooth finish without additional processing or coverings that obscure the grain. Ideal for interior cabinetry where natural coniferous appearance is desired. Meets HTS 4412.39.4012 criteria for Douglas fir specific sanded plywood.
Douglas Fir Sanded Lumber Core Plywood 4x8 Sheet
4x8 ft plywood sheets with lumber core construction but outer plies of Douglas fir veneers ≤6mm, fully sanded on the face side without further treatment. Both outer layers are coniferous Douglas fir, maintaining visible grain texture. HTS 4412.39.4012 applies to this non-covered, sanded Douglas fir plywood.
Douglas Fir Single Face Sanded Plywood for Furniture
Plywood panels designed for furniture applications, with Douglas fir coniferous outer plies each ≤6mm thick, fully sanded on one primary face but left rough on back, no grain-obscuring coverings. Consists solely of wood sheets meeting the exact specs of HTS 4412.39.4012.