Douglas Fir Cabinet Grade Plywood 5/8 Inch
Cabinet-grade plywood featuring Douglas fir outer plies from thin wood sheets ≤6mm each, fully sanded on one face to a smooth finish without additional processing or coverings that obscure the grain. Ideal for interior cabinetry where natural coniferous appearance is desired. Meets HTS 4412.39.4012 criteria for Douglas fir specific sanded plywood.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If at least one outer ply is inland spruce
Specific subheading for spruce outer plies within coniferous sanded plywood category.
If sold as individual veneer sheets rather than assembled plywood
Veneer sheets ≤6mm classify under Chapter 44 heading 4408 before lamination into plywood.
If ply thickness exceeds 6mm
Thicker plies in fiberboard-style density move to heading 4411 for MDF or similar.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Label panels clearly with species (Douglas fir), thickness, and sanding status for CBP inspection
• Check for formaldehyde emission compliance under TSCA Title VI for composite wood products
Related Products under HTS 4412.39.40.12
Douglas Fir Utility Plywood Sheathing 1/2 Inch
Utility-grade plywood sheathing made from sheets of Douglas fir veneers, each ≤6mm thick, with both outer plies coniferous Douglas fir, fully sanded on one face for improved adhesion but not further worked. The natural wood grain remains visible as it lacks opaque coverings. Classified under HTS 4412.39.4012 for its Douglas fir composition and minimal processing.
Douglas Fir Construction Plywood 19/32 Inch Sanded
19/32 inch thick construction plywood with Douglas fir face and back veneers ≤6mm, fully sanded on at least one face for structural use, no additional surface treatments obscuring the coniferous grain. Fits precisely under HTS 4412.39.4012 as specified Douglas fir sanded plywood.
Douglas Fir Sanded Plywood Panel 3/4 Inch
This plywood panel consists solely of thin wood sheets with both outer plies made from coniferous Douglas fir wood, fully sanded on at least one face for a smooth finish but not further processed. Each ply is not exceeding 6 mm thick, and it is not surface-covered with anything that obscures the wood grain. It falls under HTS 4412.39.4012 due to the specific Douglas fir outer ply and sanding specification.
Douglas Fir Sanded Lumber Core Plywood 4x8 Sheet
4x8 ft plywood sheets with lumber core construction but outer plies of Douglas fir veneers ≤6mm, fully sanded on the face side without further treatment. Both outer layers are coniferous Douglas fir, maintaining visible grain texture. HTS 4412.39.4012 applies to this non-covered, sanded Douglas fir plywood.
Douglas Fir Single Face Sanded Plywood for Furniture
Plywood panels designed for furniture applications, with Douglas fir coniferous outer plies each ≤6mm thick, fully sanded on one primary face but left rough on back, no grain-obscuring coverings. Consists solely of wood sheets meeting the exact specs of HTS 4412.39.4012.
Douglas Fir Underlayment Plywood Sanded One Face
Underlayment plywood with Douglas fir outer plies from wood sheets ≤6mm, sanded fully on the top face for flooring applications but not further processed, grain visible through clear status. HTS 4412.39.4012 covers this coniferous Douglas fir variant exactly.