Ash Wood Plywood Panel
Utility plywood with ash (nonconiferous) outer plies on mixed core, all sheets ≤6mm thick, transparent coating only. HTS 4412.34.32 for other plywood used in flooring underlayment where ash grain remains visible.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If pre-cut into box or crate parts
Plywood specifically for pallets/boxes classifies under 4415.
If wood continuously shaped along edges before lamination
Pre-profiled wood sheets fall to heading 4409.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Declare panel density accurately; lightweight cores affect strength grading
• Transparent UV inhibitors allowed but must not alter grain appearance per note
• Mark panels with country of manufacture per CBP marking rules
Related Products under HTS 4412.34.32
Oak Face Birch Core Plywood Sheet
This plywood panel features an outer ply of oak (nonconiferous wood) over a birch core, with each ply not exceeding 6mm thickness. It qualifies under HTS 4412.34.32 as other plywood not surface-covered or covered only with transparent material that preserves the wood grain visibility. Commonly used for cabinetry and furniture where natural oak appearance is desired.
Poplar Outer Ply Marine Grade Plywood
Marine-grade plywood with poplar (nonconiferous) outer plies and waterproof glue, each layer ≤6mm thick. Falls under 4412.34.32 as unsurfaced plywood with nonconiferous face ply, suitable for boat building where grain visibility is maintained. Not covered with anything obscuring the natural poplar texture.
Walnut Face Lauan Core Plywood Panel
High-end plywood with walnut veneer face (nonconiferous) on lauan core plies, all ≤6mm thick, no obscuring surface cover. Classified in 4412.34.32 for other nonconiferous outer ply plywood used in premium furniture. Transparent protection maintains walnut grain and markings.
Mahogany Outer Ply Structural Plywood
Structural plywood panels with mahogany (nonconiferous) outer plies over softwood core, each ply ≤6mm, untreated surface. Meets HTS 4412.34.32 as other plywood preserving natural wood texture for formwork and framing applications.
Cherry Wood Face Poplar Plywood
Decorative plywood with cherry (nonconiferous) face ply on poplar core sheets, all plies ≤6mm, clear surface only. Under 4412.34.32 for other nonconiferous plywood ideal for interior paneling showing cherry grain patterns.
Teak Face Plywood for Exterior Use
Plywood with teak (nonconiferous) outer ply for weather-resistant applications, plies ≤6mm thick, no grain-obscuring cover. HTS 4412.34.32 applies to this other plywood maintaining teak's natural markings for decking substrates.