Oak Face Birch Core Plywood Sheet
This plywood panel features an outer ply of oak (nonconiferous wood) over a birch core, with each ply not exceeding 6mm thickness. It qualifies under HTS 4412.34.32 as other plywood not surface-covered or covered only with transparent material that preserves the wood grain visibility. Commonly used for cabinetry and furniture where natural oak appearance is desired.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If outer ply is dark red meranti, white lauan, or similar tropical wood
Specific tropical nonconiferous woods are classified separately under 4412.33 to distinguish from other species.
If surface-covered with opaque decorative material
Plywood with non-transparent surface coverings shifts to 4412.94 headings.
If imported as pre-cut cabinet door panels
Finished wooden door components for builders' joinery fall under Chapter 44 heading 4418.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify each ply thickness does not exceed 6mm and document species of outer ply as nonconiferous (e.g
• oak) to avoid reclassification
• Provide mill certificates confirming no surface covering obscures grain; common pitfall is mislabeling as veneered panels
• Ensure formaldehyde emission compliance (e.g
• CARB Phase 2) with test reports for US market entry
Related Products under HTS 4412.34.32
Poplar Outer Ply Marine Grade Plywood
Marine-grade plywood with poplar (nonconiferous) outer plies and waterproof glue, each layer ≤6mm thick. Falls under 4412.34.32 as unsurfaced plywood with nonconiferous face ply, suitable for boat building where grain visibility is maintained. Not covered with anything obscuring the natural poplar texture.
Walnut Face Lauan Core Plywood Panel
High-end plywood with walnut veneer face (nonconiferous) on lauan core plies, all ≤6mm thick, no obscuring surface cover. Classified in 4412.34.32 for other nonconiferous outer ply plywood used in premium furniture. Transparent protection maintains walnut grain and markings.
Mahogany Outer Ply Structural Plywood
Structural plywood panels with mahogany (nonconiferous) outer plies over softwood core, each ply ≤6mm, untreated surface. Meets HTS 4412.34.32 as other plywood preserving natural wood texture for formwork and framing applications.
Cherry Wood Face Poplar Plywood
Decorative plywood with cherry (nonconiferous) face ply on poplar core sheets, all plies ≤6mm, clear surface only. Under 4412.34.32 for other nonconiferous plywood ideal for interior paneling showing cherry grain patterns.
Teak Face Plywood for Exterior Use
Plywood with teak (nonconiferous) outer ply for weather-resistant applications, plies ≤6mm thick, no grain-obscuring cover. HTS 4412.34.32 applies to this other plywood maintaining teak's natural markings for decking substrates.
Maple Outer Ply Cabinet Grade Plywood
Cabinet-grade plywood featuring maple (nonconiferous) face and back plies over hardwood core, each ≤6mm. Classifies under 4412.34.32 as other unsurfaced plywood displaying clear maple grain texture for kitchen cabinetry.