Walnut Multi-Ply Wood Flooring
Laminated plywood flooring panels featuring a walnut outer face ply (nonconiferous), with inner wood sheets ≤6mm each, transparent oil finish preserving natural grain for residential use. Classified under HTS 4412.34.3225 due to plywood construction solely of wood sheets, nonconiferous outer ply, minimal transparent surface treatment, and specific wood flooring application. Differentiates from solid hardwood via cross-layered plies for stability.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If supplied as solid sheets without lamination
Solid nonconiferous wood sheets/planks for flooring fall under 4408, not laminated plywood.
If outer ply is a specified nonconiferous like beech/oak but structured differently
Subheading 4412.33 applies to listed species outer plies; 4412.34 for other nonconiferous.
If for industrial-strength versions with fiberboard core
If incorporating density fiberboard or particleboard, shifts to Chapter 44 heading 4411 for composites.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document exact wood species (walnut as nonconiferous) and ply count/thickness to avoid disputes at customs
• Transparent finishes must be tested not to obscure grain; provide lab reports to prevent reclassification
• Label as 'engineered flooring' not 'hardwood' to match flooring definition; watch for moisture content rules
Related Products under HTS 4412.34.32.25
Oak Engineered Wood Flooring Panels
Plywood-based engineered wood flooring with an outer ply of oak (nonconiferous wood), multiple inner plies each not exceeding 6mm thick, designed specifically for floor installation. Meets HTS 4412.34.3225 as plywood consisting solely of wood sheets, at least one outer ply nonconiferous not under 4412.33, not surface-covered or with transparent coating not obscuring grain, and classified as wood flooring. The layered construction distinguishes it from solid wood under other headings.
Cherry Veneer Plywood Flooring
High-end cherry wood outer ply on plywood core (all wood sheets ≤6mm), with transparent protective coating that reveals grain/markings, designed as click-lock flooring for commercial spaces. Under HTS 4412.34.3225 for plywood flooring with other nonconiferous outer ply, not obscuring surfaces. Engineered for durability unlike single-sheet veneer panels.
Ash Wood Laminated Flooring Panels
Plywood panels for flooring with ash (nonconiferous) face ply, inner hardwood/softwood sheets ≤6mm, water-based clear coat preserving natural markings, micro-bevel edges. HTS 4412.34.3225 applies as other wood flooring plywood, nonconiferous outer not listed elsewhere, transparent or no cover. Ideal for wide-plank flooring aesthetics with stability.
Hickory Engineered Plank Flooring
Multi-ply engineered planks with hickory outer veneer (nonconiferous wood), ≤6mm plies throughout, UV-cured clear finish showing texture, suitable for high-traffic areas. Classifies to HTS 4412.34.3225 as plywood wood flooring, other nonconiferous ply, surface not obscuring grain. Cross-grain construction reduces warping.
Teak Alternative Plywood Flooring
Plywood flooring mimicking teak grain but using other nonconiferous species outer ply, all wood sheets ≤6mm, transparent lacquer finish, bevelled for floating installation. HTS 4412.34.3225 for other wood flooring plywood not surface-covered obscuringly. Economical stable alternative to tropical hardwoods.
European Beech Plywood Floorboards
Laminated floorboards with European beech (listed nonconiferous but 'other' here) outer ply on plywood ≤6mm sheets, oil finish transparent to grain, tongue-groove for glue-down. Under HTS 4412.34.3225 as wood flooring plywood with nonconiferous outer not in 4412.33 context, no obscuring cover. Preferred for European-style interiors.