Oak Engineered Wood Flooring Panels

Plywood-based engineered wood flooring with an outer ply of oak (nonconiferous wood), multiple inner plies each not exceeding 6mm thick, designed specifically for floor installation. Meets HTS 4412.34.3225 as plywood consisting solely of wood sheets, at least one outer ply nonconiferous not under 4412.33, not surface-covered or with transparent coating not obscuring grain, and classified as wood flooring. The layered construction distinguishes it from solid wood under other headings.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳China8%+35.0%43%
🇲🇽Mexico8%+10.0%18%
🇨🇦Canada8%+10.0%18%
🇩🇪Germany8%+10.0%18%
🇯🇵Japan8%+10.0%18%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

4412.31Lower: 18% vs 43%

If at least one outer ply is tropical wood like teak

Tropical nonconiferous woods shift to subheading 4412.33, but if qualifying as 4412.31 for coniferous outer ply.

4418.40.00.00Lower: 38.2% vs 43%

If sold as complete assembled flooring with tongue-and-groove but exceeding ply limits

Finished wooden flooring of assembled blocks/boards falls under 4418 if not qualifying as thin-ply plywood.

4412Same rate: 43%

If surface-covered with printed paper or foil obscuring grain

Surface-covered plywood regardless of outer ply moves to 4412.94 when covering obscures wood texture/markings.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

Verify each ply thickness ≤6mm and outer ply species documentation to confirm nonconiferous classification under 4412.34

Provide mill certificates proving no surface covering obscures wood grain; common pitfall is mislabeling as finished floor

Ensure 'wood flooring' intent via installation guides; bulk shipments may need reclassification if not retail-ready

Related Products under HTS 4412.34.32.25

Walnut Multi-Ply Wood Flooring

Laminated plywood flooring panels featuring a walnut outer face ply (nonconiferous), with inner wood sheets ≤6mm each, transparent oil finish preserving natural grain for residential use. Classified under HTS 4412.34.3225 due to plywood construction solely of wood sheets, nonconiferous outer ply, minimal transparent surface treatment, and specific wood flooring application. Differentiates from solid hardwood via cross-layered plies for stability.

Cherry Veneer Plywood Flooring

High-end cherry wood outer ply on plywood core (all wood sheets ≤6mm), with transparent protective coating that reveals grain/markings, designed as click-lock flooring for commercial spaces. Under HTS 4412.34.3225 for plywood flooring with other nonconiferous outer ply, not obscuring surfaces. Engineered for durability unlike single-sheet veneer panels.

Ash Wood Laminated Flooring Panels

Plywood panels for flooring with ash (nonconiferous) face ply, inner hardwood/softwood sheets ≤6mm, water-based clear coat preserving natural markings, micro-bevel edges. HTS 4412.34.3225 applies as other wood flooring plywood, nonconiferous outer not listed elsewhere, transparent or no cover. Ideal for wide-plank flooring aesthetics with stability.

Hickory Engineered Plank Flooring

Multi-ply engineered planks with hickory outer veneer (nonconiferous wood), ≤6mm plies throughout, UV-cured clear finish showing texture, suitable for high-traffic areas. Classifies to HTS 4412.34.3225 as plywood wood flooring, other nonconiferous ply, surface not obscuring grain. Cross-grain construction reduces warping.

Teak Alternative Plywood Flooring

Plywood flooring mimicking teak grain but using other nonconiferous species outer ply, all wood sheets ≤6mm, transparent lacquer finish, bevelled for floating installation. HTS 4412.34.3225 for other wood flooring plywood not surface-covered obscuringly. Economical stable alternative to tropical hardwoods.

European Beech Plywood Floorboards

Laminated floorboards with European beech (listed nonconiferous but 'other' here) outer ply on plywood ≤6mm sheets, oil finish transparent to grain, tongue-groove for glue-down. Under HTS 4412.34.3225 as wood flooring plywood with nonconiferous outer not in 4412.33 context, no obscuring cover. Preferred for European-style interiors.