Walnut Face Marine Plywood
Marine-grade plywood featuring walnut (Juglans spp.) outer ply, cross-laminated wood sheets ≤6 mm each, untreated surface for varnish application. Water-resistant glue but no covering. HTS 4412.33.32.75 due to species and not surface-covered status.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If other nonconiferous species not in the listed 19 hardwoods
Only specific enumerated species qualify for 4412.33; others go to 4412.29.
If in the rough or roughly squared, not laminated
Unworked coniferous wood logs or lumber precede plywood processing.
If densified with extreme compression
Densified wood heading 4413 covers highly compressed wooden materials.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify water-resistant glue type but note it doesn't affect surface-covered status
• Include photos of grain visibility in documentation to prove no obscuring layer
• Segregate from painted stock; mixing lots leads to average duty miscalculations
Related Products under HTS 4412.33.32.75
Alder Plywood Panel 4x8 ft
A 3/4-inch thick plywood panel measuring 4 feet by 8 feet, consisting solely of thin wood sheets with at least one outer ply of alder (Alnus spp.), a nonconiferous hardwood. Each ply is not exceeding 6 mm thick, and the panel is not surface-covered, preserving the natural grain and texture of the face ply. This product falls under HTS 4412.33.32.75 due to its specific species composition and lack of surface covering.
Birch Face Plywood Sheet 18mm
An 18 mm thick plywood sheet with birch (Betula spp.) as the outer face ply, made from multiple thin wood layers glued together, each not exceeding 6 mm. Unsurface-covered to showcase the birch grain, ideal for custom furniture. Classified under HTS 4412.33.32.75 for its nonconiferous hardwood outer ply and natural finish.
Oak Veneer Plywood 12mm Cabinet Grade
12 mm plywood panel with genuine oak (Quercus spp.) outer ply, composed of wood sheets each ≤6 mm thick, no surface covering applied. Designed for high-end cabinetry, exposing the natural oak texture. Fits HTS 4412.33.32.75 as other plywood with specified nonconiferous outer ply, not surface-covered.
Maple Plywood Panel for Furniture
Standard furniture-grade plywood with maple (Acer spp.) face and back plies, each sheet ≤6 mm, total thickness 15 mm, unsurface-covered. Highlights maple's figuring for visible applications. Under HTS 4412.33.32.75 for nonconiferous species plywood without surface covering.
Beech Plywood 3/4-inch Sheet
3/4-inch (19 mm) beech (Fagus spp.) plywood sheet, laminated from plies each not exceeding 6 mm, with no surface covering to display natural beech grain. Suitable for interior paneling. Classified in HTS 4412.33.32.75 as other not surface-covered plywood with listed nonconiferous ply.
Poplar Core Birch Plywood Panel
Plywood with birch face over poplar (Populus spp.) core plies, all ≤6 mm thick, 18 mm total, no surface treatment. Balances cost and aesthetics for millwork. Falls under HTS 4412.33.32.75 for nonconiferous outer ply, not covered.