Maple Plywood Panel for Furniture
Standard furniture-grade plywood with maple (Acer spp.) face and back plies, each sheet ≤6 mm, total thickness 15 mm, unsurface-covered. Highlights maple's figuring for visible applications. Under HTS 4412.33.32.75 for nonconiferous species plywood without surface covering.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If for spruce-pine-fir (S-P-F) coniferous outer plies
S-P-F specific coniferous plywood uses dedicated statistical suffixes.
If supplied as thick veneer sheets over 6 mm per ply
Veneer sheets exceed the thin ply limit for heading 4412 plywood.
If cut into small shapes or moldings rather than full panels
Worked wood like profiled or shaped pieces falls under heading 4421.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Use ISPM 15 compliant pallets for shipping to meet phytosanitary standards
• Document glue type and emissions to satisfy TSCA Title VI for composite panels
• Specify 'other' category accurately; avoid generic 'hardwood plywood' descriptions
Related Products under HTS 4412.33.32.75
Alder Plywood Panel 4x8 ft
A 3/4-inch thick plywood panel measuring 4 feet by 8 feet, consisting solely of thin wood sheets with at least one outer ply of alder (Alnus spp.), a nonconiferous hardwood. Each ply is not exceeding 6 mm thick, and the panel is not surface-covered, preserving the natural grain and texture of the face ply. This product falls under HTS 4412.33.32.75 due to its specific species composition and lack of surface covering.
Birch Face Plywood Sheet 18mm
An 18 mm thick plywood sheet with birch (Betula spp.) as the outer face ply, made from multiple thin wood layers glued together, each not exceeding 6 mm. Unsurface-covered to showcase the birch grain, ideal for custom furniture. Classified under HTS 4412.33.32.75 for its nonconiferous hardwood outer ply and natural finish.
Oak Veneer Plywood 12mm Cabinet Grade
12 mm plywood panel with genuine oak (Quercus spp.) outer ply, composed of wood sheets each ≤6 mm thick, no surface covering applied. Designed for high-end cabinetry, exposing the natural oak texture. Fits HTS 4412.33.32.75 as other plywood with specified nonconiferous outer ply, not surface-covered.
Beech Plywood 3/4-inch Sheet
3/4-inch (19 mm) beech (Fagus spp.) plywood sheet, laminated from plies each not exceeding 6 mm, with no surface covering to display natural beech grain. Suitable for interior paneling. Classified in HTS 4412.33.32.75 as other not surface-covered plywood with listed nonconiferous ply.
Walnut Face Marine Plywood
Marine-grade plywood featuring walnut (Juglans spp.) outer ply, cross-laminated wood sheets ≤6 mm each, untreated surface for varnish application. Water-resistant glue but no covering. HTS 4412.33.32.75 due to species and not surface-covered status.
Poplar Core Birch Plywood Panel
Plywood with birch face over poplar (Populus spp.) core plies, all ≤6 mm thick, 18 mm total, no surface treatment. Balances cost and aesthetics for millwork. Falls under HTS 4412.33.32.75 for nonconiferous outer ply, not covered.