Walnut Veneer Core Plywood for Cabinet Doors
High-quality plywood sheet with walnut outer face ply over poplar core, total thickness 18mm, designed for custom cabinet doors. Classified under 4412.33.26.30 due to nonconiferous walnut face ply, no obscuring surface cover, and all plies ≤6mm. Ideal for interior millwork preserving natural walnut figuring.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If with outer ply of other specified nonconiferous wood like oak
Walnut-specific subheading excludes panels with oak, maple, etc., face plies which go to broader nonconiferous category.
If any ply exceeds 6mm thickness
Medium density fiberboard (MDF) or thicker ply constructions fall under Chapter 44 heading 4411 for density-based wood products.
If imported as sheets of walnut veneer only, not laminated plywood
Single-layer veneer sheets (not assembled into plywood) classify under veneer heading rather than laminated panels.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document inner ply materials (e.g
• poplar core) separately as they must not alter the nonconiferous outer ply classification
• Use non-VOC clear coatings only to maintain transparent surface status; test for binder content if questioned
Related Products under HTS 4412.33.26.30
Walnut Face Plywood Panel 4x8 Sheet
A 3/4-inch thick plywood panel measuring 4 feet by 8 feet with a face ply of walnut (Juglans spp.) wood and inner plies of mixed hardwood, each not exceeding 6mm thick. This falls under HTS 4412.33.26.30 as it is other plywood (not surface-covered beyond clear coat), with at least one outer ply of nonconiferous walnut species. Used primarily for high-end cabinetry and furniture construction where walnut grain is showcased.
Black Walnut Plywood for Furniture Panels
Plywood panels featuring Juglans nigra (black walnut) face ply over hardwood core, 12mm thick, for premium furniture like tabletops. Meets HTS 4412.33.26.30 criteria: other plywood with walnut outer ply, clear finish only, plies ≤6mm each. Highlights rich dark grain of black walnut species.
Walnut Hardwood Plywood Shelf Board
18mm walnut-faced plywood boards for retail shelving units, with consistent Juglans outer ply and balanced hardwood interior. Falls under 4412.33.26.30 as nonsurface-covered (clear only) plywood featuring specified nonconiferous walnut species, each ply ≤6mm. Provides strength and aesthetic appeal for store fixtures.
Juglans Regia Walnut Plywood for Millwork
Premium plywood with Juglans regia (English walnut) outer face ply, used in architectural millwork like wainscoting. HTS 4412.33.26.30 applies to this other plywood: walnut species, transparent surface only, thin plies throughout. Valued for fine grain in interior trim applications.