Juglans Regia Walnut Plywood for Millwork
Premium plywood with Juglans regia (English walnut) outer face ply, used in architectural millwork like wainscoting. HTS 4412.33.26.30 applies to this other plywood: walnut species, transparent surface only, thin plies throughout. Valued for fine grain in interior trim applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If face ply of eucalyptus or other listed species
Narrow walnut subheading vs. broader nonconiferous wood species in subsequent codes.
If cellular (beadboard) construction
Wood doors, windows, blinds use cellular materials heading, excluding standard plywood.
If imported as sawn walnut lumber planks, not laminated
Unlaminated wood in planks/thickness >6mm classifies as lumber, not plywood panels.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide scientific name (Juglans spp.) on docs to distinguish from restricted species under CITES
• Clear coat must be tested transparent—opaque stains reclassify under surface-covered codes
Related Products under HTS 4412.33.26.30
Walnut Face Plywood Panel 4x8 Sheet
A 3/4-inch thick plywood panel measuring 4 feet by 8 feet with a face ply of walnut (Juglans spp.) wood and inner plies of mixed hardwood, each not exceeding 6mm thick. This falls under HTS 4412.33.26.30 as it is other plywood (not surface-covered beyond clear coat), with at least one outer ply of nonconiferous walnut species. Used primarily for high-end cabinetry and furniture construction where walnut grain is showcased.
Walnut Veneer Core Plywood for Cabinet Doors
High-quality plywood sheet with walnut outer face ply over poplar core, total thickness 18mm, designed for custom cabinet doors. Classified under 4412.33.26.30 due to nonconiferous walnut face ply, no obscuring surface cover, and all plies ≤6mm. Ideal for interior millwork preserving natural walnut figuring.
Black Walnut Plywood for Furniture Panels
Plywood panels featuring Juglans nigra (black walnut) face ply over hardwood core, 12mm thick, for premium furniture like tabletops. Meets HTS 4412.33.26.30 criteria: other plywood with walnut outer ply, clear finish only, plies ≤6mm each. Highlights rich dark grain of black walnut species.
Walnut Hardwood Plywood Shelf Board
18mm walnut-faced plywood boards for retail shelving units, with consistent Juglans outer ply and balanced hardwood interior. Falls under 4412.33.26.30 as nonsurface-covered (clear only) plywood featuring specified nonconiferous walnut species, each ply ≤6mm. Provides strength and aesthetic appeal for store fixtures.