4.5mm MR Eucalyptus MDF
Moisture resistant MDF from eucalyptus fibers, 4.5mm thick, green core color for kitchen cabinets. HTS 4411.12.90.90 for other MDF not exceeding 5mm. Wax/paraffin additives for MR don't change classification.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If mechanically compressed to hardboard
Higher compression yields densified products in 4413.
If pre-cut to finished shelving dimensions
Advanced manufacture beyond material stage.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• MR designation needs water absorption test results (<15% typical)
• Colorants/preservatives must not exceed fiberboard material specs
• Bulk shipments require proper ventilation to prevent moisture damage
Related Products under HTS 4411.12.90.90
5mm Oak Veneer MDF Panel
Medium density fiberboard (MDF) panel with oak wood veneer on both sides, thickness 4.8mm, used for cabinet doors and furniture components. Classified under HTS 4411.12.90.90 as MDF of thickness not exceeding 5mm, not of common softwood species. Meets fiberboard definition from ligneous materials bonded with resins.
4mm Poplar MDF Sheet
Unfinished poplar medium density fiberboard sheet, 4mm thick, density 700-800 kg/m³, for speaker cabinets and millwork. HTS 4411.12.90.90 applies to MDF ≤5mm not specified elsewhere, made from ligneous materials bonded with resins. Standard size 1220x2440mm.
3.5mm Birch Core MDF
Birch-sourced medium density fiberboard panel, 3.5mm thickness, smooth surface for painting and lamination in furniture production. Falls under 4411.12.90.90 as other MDF ≤5mm, excluding common softwoods. Density meets 0.65-0.80 g/cm³ standard.
4.2mm Eucalyptus MDF Board
Eucalyptus fiber medium density fiberboard, 4.2mm thick, moisture resistant grade for door skins and shelving. HTS 4411.12.90.90 for other MDF ≤5mm; eucalyptus not common softwood. Bonded with synthetic resins per Chapter 44 definition.
2.8mm Acacia Thin MDF
Ultra-thin acacia medium density fiberboard panel, 2.8mm thickness, ideal for curved furniture and model making. Under 4411.12.90.90 as other MDF not exceeding 5mm thickness. Produced from ligneous acacia fibers with minimal resin binder.
4.9mm Teak Effect MDF
Medium density fiberboard with printed teak wood grain finish, 4.9mm thick, for retail furniture panels. HTS 4411.12.90.90 covers other MDF ≤5mm; print doesn't change base material classification. Density 720 kg/m³ standard.