3.5mm Birch Core MDF
Birch-sourced medium density fiberboard panel, 3.5mm thickness, smooth surface for painting and lamination in furniture production. Falls under 4411.12.90.90 as other MDF ≤5mm, excluding common softwoods. Density meets 0.65-0.80 g/cm³ standard.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness exceeds 9mm
Thicker MDF panels (>9mm) fall into 4411.92 or higher thickness subheadings.
If in pellet form from same wood waste
Wood processing by-products agglomerated as pellets classified under fuel headings.
If reinforced with glass fibers
Fiber-reinforced panels treated as artificial stone or composite materials.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide species origin documentation; birch not considered 'common softwood' per HTS notes
• Test for urea-formaldehyde emissions; non-compliant panels subject to Lacey Act declarations
• Separate from HDF (high density) by density specs in entry docs to avoid 4411.19 reclassification
Related Products under HTS 4411.12.90.90
5mm Oak Veneer MDF Panel
Medium density fiberboard (MDF) panel with oak wood veneer on both sides, thickness 4.8mm, used for cabinet doors and furniture components. Classified under HTS 4411.12.90.90 as MDF of thickness not exceeding 5mm, not of common softwood species. Meets fiberboard definition from ligneous materials bonded with resins.
4mm Poplar MDF Sheet
Unfinished poplar medium density fiberboard sheet, 4mm thick, density 700-800 kg/m³, for speaker cabinets and millwork. HTS 4411.12.90.90 applies to MDF ≤5mm not specified elsewhere, made from ligneous materials bonded with resins. Standard size 1220x2440mm.
4.2mm Eucalyptus MDF Board
Eucalyptus fiber medium density fiberboard, 4.2mm thick, moisture resistant grade for door skins and shelving. HTS 4411.12.90.90 for other MDF ≤5mm; eucalyptus not common softwood. Bonded with synthetic resins per Chapter 44 definition.
2.8mm Acacia Thin MDF
Ultra-thin acacia medium density fiberboard panel, 2.8mm thickness, ideal for curved furniture and model making. Under 4411.12.90.90 as other MDF not exceeding 5mm thickness. Produced from ligneous acacia fibers with minimal resin binder.
4.9mm Teak Effect MDF
Medium density fiberboard with printed teak wood grain finish, 4.9mm thick, for retail furniture panels. HTS 4411.12.90.90 covers other MDF ≤5mm; print doesn't change base material classification. Density 720 kg/m³ standard.
3.2mm Recycled Wood MDF
MDF panel from 100% recycled wood fibers, 3.2mm thickness, eco-friendly grade for shelving and displays. Fits 4411.12.90.90 as other medium density fiberboard ≤5mm. Complies with Chapter 44 woody materials definition.