Plain Pine Wood Dowel Rods 1/2 Inch Diameter
Straight cylindrical rods made from pine wood, continuously shaped along their length with a uniform 1/2 inch diameter, supplied in plain finish without additional coatings or treatments. These classify under HTS 4409.10.60.00 as plain coniferous wood dowel rods that are shaped (rounded) along their edges/faces but not assembled or further finished beyond basic planing/sanding.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not continuously shaped or profiled
Unshaped coniferous wood in the rough or roughly squared falls under sawn wood heading 4407, lacking the continuous edge/face shaping required for 4409.
If chemically or preservative treated
Dowel rods impregnated or treated with preservatives shift to 4418 for worked wood with surface treatments, excluding plain machined products.
If under 12 inches long and used as pegs
Short wooden dowel pegs or sticks not meeting continuous rod criteria may classify as other articles of wood rather than profiled rods.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species is coniferous (e.g
• pine) via botanical identification certificates to avoid reclassification to non-coniferous codes
• Ensure rods meet 'plain' criteria—no stains, paints, or preservatives exceeding basic machining—to prevent shifts to 4418.xx for treated wood
• Provide mill certificates showing moisture content under 19% for coniferous wood to comply with phytosanitary requirements
Related Products under HTS 4409.10.60.00
Plain Spruce Wood Dowel Rods 3/8 Inch Diameter
Cylindrical spruce dowel rods with a 3/8 inch diameter, machined smooth along their entire length, plain without knots, coatings, or joints. Falls under HTS 4409.10.60.00 for plain coniferous wood dowels continuously shaped (rounded) but not assembled or end-jointed.
Plain Fir Wood Dowel Rods 5/8 Inch Diameter
Uniform fir wood dowels, 5/8 inch diameter, continuously rounded and sanded plain for woodworking applications like furniture joints. Classified in HTS 4409.10.60.00 as other plain coniferous wood dowel rods, shaped along faces but not tongued/grooved or assembled.
Plain Cedar Wood Dowel Rods 3/4 Inch Diameter
Plain cylindrical cedar dowel rods, 3/4 inch diameter, machined smooth without preservatives or finishes, ideal for closet rods or crafts. HTS 4409.10.60.00 applies to these continuously shaped (rounded) plain coniferous dowels.
Plain Hemlock Wood Dowel Rods 1 Inch Diameter
Heavy-duty plain hemlock dowel rods with 1-inch diameter, continuously rounded and end-trimmed, used in structural crafts. Meets HTS 4409.10.60.00 as plain 'other' coniferous dowel rods, shaped but not rebated or molded beyond cylinder form.
Plain Larch Wood Dowel Rods 1/4 Inch Diameter
Fine plain larch dowel rods, 1/4 inch diameter for model making and small joints, continuously shaped smooth. HTS 4409.10.60.00 for plain coniferous (larch) wood dowels.
Plain Douglas Fir Dowel Rods 7/8 Inch Diameter
Robust plain Douglas fir dowels, 7/8 inch, sanded smooth for shelving supports. Coniferous plain dowel rods under HTS 4409.10.60.00.