Plain Fir Wood Dowel Rods 5/8 Inch Diameter
Uniform fir wood dowels, 5/8 inch diameter, continuously rounded and sanded plain for woodworking applications like furniture joints. Classified in HTS 4409.10.60.00 as other plain coniferous wood dowel rods, shaped along faces but not tongued/grooved or assembled.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | Free | +35.0% | 35% |
| š²š½Mexico | Free | +10.0% | 10% |
| šØš¦Canada | Free | +10.0% | 10% |
| š©šŖGermany | Free | +10.0% | 10% |
| šÆšµJapan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If Hem-fir mix and unshaped
Hem-fir sawn wood without continuous shaping goes to 4407.14; specific mixed species note applies only to rough form.
If shaped for joinery but assembled
Assembled cellular wood panels or joinery fittings shift from profiled rods to 4418.40.
If made from tropical hardwood
Identical plain dowel rods from non-coniferous species like oak classify under parallel tropical wood subheading 4409.20.60.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Use precise species declaration (e.g
ā¢ Douglas fir) on commercial invoices to match coniferous criteria and avoid 4409.20 hardwood reclass
ā¢ Bundle in lengths over 36 inches to clearly differentiate from pegs, reducing audit risks
ā¢ Include fumigation certificates if not kiln-dried, as coniferous wood requires phytosanitary treatment
Related Products under HTS 4409.10.60.00
Plain Pine Wood Dowel Rods 1/2 Inch Diameter
Straight cylindrical rods made from pine wood, continuously shaped along their length with a uniform 1/2 inch diameter, supplied in plain finish without additional coatings or treatments. These classify under HTS 4409.10.60.00 as plain coniferous wood dowel rods that are shaped (rounded) along their edges/faces but not assembled or further finished beyond basic planing/sanding.
Plain Spruce Wood Dowel Rods 3/8 Inch Diameter
Cylindrical spruce dowel rods with a 3/8 inch diameter, machined smooth along their entire length, plain without knots, coatings, or joints. Falls under HTS 4409.10.60.00 for plain coniferous wood dowels continuously shaped (rounded) but not assembled or end-jointed.
Plain Cedar Wood Dowel Rods 3/4 Inch Diameter
Plain cylindrical cedar dowel rods, 3/4 inch diameter, machined smooth without preservatives or finishes, ideal for closet rods or crafts. HTS 4409.10.60.00 applies to these continuously shaped (rounded) plain coniferous dowels.
Plain Hemlock Wood Dowel Rods 1 Inch Diameter
Heavy-duty plain hemlock dowel rods with 1-inch diameter, continuously rounded and end-trimmed, used in structural crafts. Meets HTS 4409.10.60.00 as plain 'other' coniferous dowel rods, shaped but not rebated or molded beyond cylinder form.
Plain Larch Wood Dowel Rods 1/4 Inch Diameter
Fine plain larch dowel rods, 1/4 inch diameter for model making and small joints, continuously shaped smooth. HTS 4409.10.60.00 for plain coniferous (larch) wood dowels.
Plain Douglas Fir Dowel Rods 7/8 Inch Diameter
Robust plain Douglas fir dowels, 7/8 inch, sanded smooth for shelving supports. Coniferous plain dowel rods under HTS 4409.10.60.00.