Spliced Pine Veneer Panels
End-jointed and spliced Scots pine veneer sheets, 4mm thick, sanded for use in laminated wood flooring and plywood production. Falls under HTS 4408.10.0145 as 'other' coniferous veneers obtained by slicing, planed and end-jointed, thickness ≤6mm.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If specifically dark red meranti despite coniferous appearance
Certain profiled cedars or meranti veneers have dedicated subheadings excluding them from 'other'.
If layered or laminated during production
Laminated wood sheets exceed simple sliced veneer classification.
If reconstructed from wood particles into sheet form
Particleboard-type sheets from wood byproducts differ from sliced logs.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide splice pattern photos and joint specs in entry docs; test for binder content if questioned; watch for misdeclaration as thicker lumber which incurs different duties
Related Products under HTS 4408.10.01.45
Western Red Cedar Veneer Sheets
Thin sheets of Western red cedar (coniferous) sliced to 3mm thickness, planed and sanded for veneering applications in furniture and cabinetry. Classified under 4408.10.0145 as coniferous wood veneer not exceeding 6mm thick, specifically 'other' category excluding dark red meranti and cedar profiles. Meets requirements for lengthwise slicing and end-jointing suitability.
Sanded Douglas Fir Veneer
Sliced Douglas fir (Pseudotsuga menziesii) veneer sheets, 2.5mm thick, sanded on both faces for high-end interior paneling and plywood cores. HTS 4408.10.0145 applies to this 'other' coniferous veneer, lengthwise sawn/peeled not exceeding 6mm.
Larch Wood Veneer Sheets
European larch veneer peeled to 5mm thickness, end-jointed for curved furniture veneering and boat interiors. Coniferous 'other' under 4408.10.0145 due to slicing process, planing, and thickness compliance.
Radiata Pine Backer Veneer
Thin 1.5mm radiata pine veneer sheets, spliced edge-to-edge for plywood backer layers in cabinet manufacturing. Qualifies as HTS 4408.10.0145 'other' coniferous sliced veneer, sanded and ≤6mm thick.
Siberian Spruce Sliced Veneer
Lengthwise sliced Siberian spruce veneer, 3.8mm thick, planed for acoustic paneling and guitar backs. 'Other' coniferous under 4408.10.0145 for peeled/sliced sheets not exceeding 6mm, suitable for lamination.
Hemlock Veneer for Plywood
Western hemlock sliced veneer sheets, 4.2mm, end-jointed and sanded specifically for plywood crossbands. HTS 4408.10.0145 'other' coniferous veneer meets thickness, slicing, and lamination criteria.