Hemlock Veneer for Plywood
Western hemlock sliced veneer sheets, 4.2mm, end-jointed and sanded specifically for plywood crossbands. HTS 4408.10.0145 'other' coniferous veneer meets thickness, slicing, and lamination criteria.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If mixed Hem-fir stands thicker than veneer
Hem-fir subheading for unknown proportion hemlock-fir sawn wood.
If from nonconiferous species like bamboo
Woody materials like bamboo classify as nonconiferous veneers.
If with at least one outer ply of coniferous plywood
Assembled plywood panels have specific ply composition rules.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify non-mixed with fir to avoid Hem-fir lumber code; include end-joint strength test data; monitor for pest quarantines on Pacific Northwest species
Related Products under HTS 4408.10.01.45
Western Red Cedar Veneer Sheets
Thin sheets of Western red cedar (coniferous) sliced to 3mm thickness, planed and sanded for veneering applications in furniture and cabinetry. Classified under 4408.10.0145 as coniferous wood veneer not exceeding 6mm thick, specifically 'other' category excluding dark red meranti and cedar profiles. Meets requirements for lengthwise slicing and end-jointing suitability.
Spliced Pine Veneer Panels
End-jointed and spliced Scots pine veneer sheets, 4mm thick, sanded for use in laminated wood flooring and plywood production. Falls under HTS 4408.10.0145 as 'other' coniferous veneers obtained by slicing, planed and end-jointed, thickness ≤6mm.
Sanded Douglas Fir Veneer
Sliced Douglas fir (Pseudotsuga menziesii) veneer sheets, 2.5mm thick, sanded on both faces for high-end interior paneling and plywood cores. HTS 4408.10.0145 applies to this 'other' coniferous veneer, lengthwise sawn/peeled not exceeding 6mm.
Larch Wood Veneer Sheets
European larch veneer peeled to 5mm thickness, end-jointed for curved furniture veneering and boat interiors. Coniferous 'other' under 4408.10.0145 due to slicing process, planing, and thickness compliance.
Radiata Pine Backer Veneer
Thin 1.5mm radiata pine veneer sheets, spliced edge-to-edge for plywood backer layers in cabinet manufacturing. Qualifies as HTS 4408.10.0145 'other' coniferous sliced veneer, sanded and ≤6mm thick.
Siberian Spruce Sliced Veneer
Lengthwise sliced Siberian spruce veneer, 3.8mm thick, planed for acoustic paneling and guitar backs. 'Other' coniferous under 4408.10.0145 for peeled/sliced sheets not exceeding 6mm, suitable for lamination.