Sawn Ash Lumber 1x6
Thickness-planed ash (Fraxinus spp.) lumber measuring 1 inch thick by 6 inches wide, sawn lengthwise with thickness exceeding 6 mm. Classified under HTS 4407.95.00.00 as sawn or chipped wood of ash, planed but not end-jointed. Ideal for custom furniture and cabinetry due to its straight grain.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If misidentified species
Falls under 'other' coniferous or hardwood if not confirmed as ash (Fraxinus spp.)
If veneer sheets under 6mm thick
Thickness ≤6mm shifts to Chapter 44 heading for sheets peeled or sliced
If shaped or profiled along edges
Beaded, molded, or profiled edges classify as profiled wood under 4418
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as Fraxinus spp. to avoid reclassification; ensure phytosanitary certificates for heat-treated lumber; measure thickness precisely as exceeding 6mm is key for this heading
Related Products under HTS 4407.95.00.00
Ash Wood Planks for Furniture
Sanded ash (Fraxinus spp.) planks, sawn lengthwise, 8/4 thickness (over 6mm), used primarily for tabletops and furniture frames. Meets HTS 4407.95.00.00 for ash wood exceeding 6mm thickness, planed or sanded. Known for its light color and shock resistance.
Planed Ash Board 4/4 Thickness
Quarter-sawn planed ash boards (Fraxinus spp.), nominal 4/4 thickness exceeding 6mm, sliced lengthwise for musical instrument bodies like guitar backs. HTS 4407.95.00.00 applies to sawn or sliced ash wood, sanded or planed. Valued for its resonance qualities.
Sliced Ash Veneer Backing 8mm
Sliced ash (Fraxinus spp.) sheets, 8mm thick, used as backing for laminated panels, planed on both sides. Qualifies for HTS 4407.95.00.00 as sliced wood exceeding 6mm thickness of ash species. Provides structural support in high-end cabinetry.
Ash Stair Tread Blanks
Rough-sawn ash (Fraxinus spp.) blanks for stair treads, 1-1/8 inch thick exceeding 6mm, sanded one face. HTS 4407.95.00.00 covers sawn ash wood planed or sanded. Durable for high-traffic flooring applications.
White Ash Lumber FAS Grade
First and Seconds (FAS) grade white ash (Fraxinus americana) lumber, sawn lengthwise, planed to 4/4 thickness over 6mm. HTS 4407.95.00.00 for ash species wood, sanded or planed. Premium grade for fine woodworking.
Rift-Sawn Ash Panels
Rift-sawn ash (Fraxinus spp.) panels, 12mm thick, end-jointed optional but primarily sawn and planed. Classifies under HTS 4407.95.00.00 as thickness-exceeding ash wood. Used for wall paneling with minimal grain expansion.