Ash Wood Planks for Furniture
Sanded ash (Fraxinus spp.) planks, sawn lengthwise, 8/4 thickness (over 6mm), used primarily for tabletops and furniture frames. Meets HTS 4407.95.00.00 for ash wood exceeding 6mm thickness, planed or sanded. Known for its light color and shock resistance.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If end-jointed
End-jointed lumber of any species over 6mm falls under specific subheading
If densified or compressed
Densified ash wood shifts to heading 4412 for worked wood
If in pellet form from shavings
Wood pellets from ash by-products agglomerated with ≤3% binder classify under 4401.31
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill certificates confirming ash species; comply with Lacey Act for species declaration; watch for end-jointing which may require 4407.29 classification
Related Products under HTS 4407.95.00.00
Sawn Ash Lumber 1x6
Thickness-planed ash (Fraxinus spp.) lumber measuring 1 inch thick by 6 inches wide, sawn lengthwise with thickness exceeding 6 mm. Classified under HTS 4407.95.00.00 as sawn or chipped wood of ash, planed but not end-jointed. Ideal for custom furniture and cabinetry due to its straight grain.
Planed Ash Board 4/4 Thickness
Quarter-sawn planed ash boards (Fraxinus spp.), nominal 4/4 thickness exceeding 6mm, sliced lengthwise for musical instrument bodies like guitar backs. HTS 4407.95.00.00 applies to sawn or sliced ash wood, sanded or planed. Valued for its resonance qualities.
Sliced Ash Veneer Backing 8mm
Sliced ash (Fraxinus spp.) sheets, 8mm thick, used as backing for laminated panels, planed on both sides. Qualifies for HTS 4407.95.00.00 as sliced wood exceeding 6mm thickness of ash species. Provides structural support in high-end cabinetry.
Ash Stair Tread Blanks
Rough-sawn ash (Fraxinus spp.) blanks for stair treads, 1-1/8 inch thick exceeding 6mm, sanded one face. HTS 4407.95.00.00 covers sawn ash wood planed or sanded. Durable for high-traffic flooring applications.
White Ash Lumber FAS Grade
First and Seconds (FAS) grade white ash (Fraxinus americana) lumber, sawn lengthwise, planed to 4/4 thickness over 6mm. HTS 4407.95.00.00 for ash species wood, sanded or planed. Premium grade for fine woodworking.
Rift-Sawn Ash Panels
Rift-sawn ash (Fraxinus spp.) panels, 12mm thick, end-jointed optional but primarily sawn and planed. Classifies under HTS 4407.95.00.00 as thickness-exceeding ash wood. Used for wall paneling with minimal grain expansion.