Sawn Cherry Lumber 1x6
Thickness-planed cherry (Prunus spp.) lumber measuring 1 inch thick by 6 inches wide, sawn lengthwise with thickness exceeding 6 mm. Classified under HTS 4407.94.00.00 as sawn or chipped wood of cherry, planed but not further worked beyond end-jointing. Ideal for high-end cabinetry and furniture due to its rich reddish-brown grain.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If species misidentified as non-cherry hardwood
Other coniferous or hardwood species fall under 4407.99, but cherry specifically requires 4407.94
If unplaned or rough sawn without thickness planing
Rough wood not planed/sanded goes to Chapter 44 heading 4403 for logs/rough timber
If machined into assembled panels or beams
Further worked into reconstructed wood panels shifts to 4418
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain phytosanitary certificate confirming Prunus spp. origin and heat treatment per ISPM 15; declare exact dimensions and moisture content; avoid misclassification as rough wood under 4403 if surfaced
Related Products under HTS 4407.94.00.00
Sliced Cherry Veneer Panels
Thin cherry wood panels sliced lengthwise, sanded, exceeding 6 mm thickness from Prunus spp. trees. Fits HTS 4407.94.00.00 for sliced/peeled wood, planed or end-jointed. Used in premium architectural paneling and custom millwork.
End-Jointed Cherry Planks 4/4
4/4 thickness (nominal 1-inch) cherry planks, end-jointed for stability, sawn from Prunus spp., sanded surface. HTS 4407.94.00.00 covers end-jointed sawn wood >6mm thick. Popular for flooring and heirloom furniture.
Planed Cherry Board FAS Grade
First and Seconds (FAS) grade cherry boards, planed to uniform thickness >6mm, sawn lengthwise from Prunus avium. Under HTS 4407.94.00.00 for planed sawn cherry wood. Premium grade for visible furniture applications.
Sanded Cherry S4S Lumber
Surfaced four sides (S4S) cherry lumber, thickness exceeding 6mm, from Prunus spp., sawn and sanded. HTS 4407.94.00.00 applies to sanded sawn wood of cherry. Ready for immediate cabinet door and drawer use.
Cherry Wood Stair Treads Blanks
Rough sawn cherry blanks for stair treads, planed thickness >6mm, Prunus spp. origin. Classifies in HTS 4407.94.00.00 as planed sawn cherry exceeding 6mm. Machined later into finished treads.
Black Cherry Sawn Timber 8/4
8/4 thickness black cherry (Prunus serotina) sawn timber, end-jointed and sanded, >6mm thick. HTS 4407.94.00.00 for all Prunus spp. sawn wood. Used for turning blanks and heavy furniture legs.