End-Jointed Cherry Planks 4/4
4/4 thickness (nominal 1-inch) cherry planks, end-jointed for stability, sawn from Prunus spp., sanded surface. HTS 4407.94.00.00 covers end-jointed sawn wood >6mm thick. Popular for flooring and heirloom furniture.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If finger-jointed into longer engineered boards
Engineered finger-jointed products classify as reconstructed timber in 4418
If oak instead of cherry species
Specific species like oak have dedicated 4407 subheadings
If molded into specific profiles like trim
Profile-molded wood shifts to Chapter 44 heading 4417
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide end-joint pattern specs and glue type certification; moisture content must be documented (typically 6-8%); watch for reclassification if joints exceed simple finger-jointing
Related Products under HTS 4407.94.00.00
Sawn Cherry Lumber 1x6
Thickness-planed cherry (Prunus spp.) lumber measuring 1 inch thick by 6 inches wide, sawn lengthwise with thickness exceeding 6 mm. Classified under HTS 4407.94.00.00 as sawn or chipped wood of cherry, planed but not further worked beyond end-jointing. Ideal for high-end cabinetry and furniture due to its rich reddish-brown grain.
Sliced Cherry Veneer Panels
Thin cherry wood panels sliced lengthwise, sanded, exceeding 6 mm thickness from Prunus spp. trees. Fits HTS 4407.94.00.00 for sliced/peeled wood, planed or end-jointed. Used in premium architectural paneling and custom millwork.
Planed Cherry Board FAS Grade
First and Seconds (FAS) grade cherry boards, planed to uniform thickness >6mm, sawn lengthwise from Prunus avium. Under HTS 4407.94.00.00 for planed sawn cherry wood. Premium grade for visible furniture applications.
Sanded Cherry S4S Lumber
Surfaced four sides (S4S) cherry lumber, thickness exceeding 6mm, from Prunus spp., sawn and sanded. HTS 4407.94.00.00 applies to sanded sawn wood of cherry. Ready for immediate cabinet door and drawer use.
Cherry Wood Stair Treads Blanks
Rough sawn cherry blanks for stair treads, planed thickness >6mm, Prunus spp. origin. Classifies in HTS 4407.94.00.00 as planed sawn cherry exceeding 6mm. Machined later into finished treads.
Black Cherry Sawn Timber 8/4
8/4 thickness black cherry (Prunus serotina) sawn timber, end-jointed and sanded, >6mm thick. HTS 4407.94.00.00 for all Prunus spp. sawn wood. Used for turning blanks and heavy furniture legs.