Sanded Red Oak Planks 2x10
Rough sawn then sanded red oak planks nominal 2x10 inches, thickness over 6 mm, sourced from Quercus species for flooring blanks. HTS 4407.91.0022 covers sliced/peeled/planed oak not exceeding basic end-jointing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If white oak instead of red oak
White oak (Quercus alba) has separate subheading 4407.91.0021 within oak category.
If machined with tongues/grooves
Profiled or tongued/grooved oak shifts to 4418.90 cellular/worked wood.
If cut to short lengths <1m for dowels
Short worked oak pieces classify as wood articles under 4421.99.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify moisture content documentation under 19% for stability; avoid bundling with accessories to prevent set classification; inspect for defects disqualifying as 'other oak'
Related Products under HTS 4407.91.00.22
Red Oak Sawn Lumber 1x6
Red oak lumber sawn lengthwise to nominal 1-inch by 6-inch dimensions, planed and sanded for smoothness, with thickness exceeding 6 mm. Classified under HTS 4407.91.0022 as sawn red oak (Quercus spp.) wood, not further manufactured beyond basic processing.
Planed Red Oak Board 4/4 x 8
Thickness-planed red oak boards in 4/4 quarter-sawn by 8-inch width, exceeding 6 mm thick, used for cabinetry. Fits HTS 4407.91.0022 for oak (Quercus spp.) sawn/planed wood not squared or further profiled.
Red Oak Sliced Veneer Backing 1/4-inch
Sliced lengthwise red oak sheets planed to 1/4-inch (6.35 mm) thickness for furniture backing, from Quercus rubra. Qualifies for 4407.91.0022 as peeled/sliced oak exceeding 6 mm, not further manufactured.
Quartersawn Red Oak Lumber 5/4 x 6
Quartersawn red oak boards at 5/4 thickness by 6 inches wide, sanded surface, over 6 mm for high-end millwork. HTS 4407.91.0022 for sawn/chipped/planed red oak (Quercus spp.).
End-Jointed Red Oak Studs 2x4
Short red oak pieces end-jointed into 2x4 studs, planed faces, thickness >6 mm for framing. Allowed under HTS 4407.91.0022 as basic end-jointed sawn oak lumber.
Red Oak Stair Risers Sawn Rough
Sawn red oak blanks cut to stair riser dimensions, lightly planed, exceeding 6 mm thick from Quercus spp. HTS 4407.91.0022 applies to unfinished sawn/planed oak stock.