Red Oak Sliced Veneer Backing 1/4-inch
Sliced lengthwise red oak sheets planed to 1/4-inch (6.35 mm) thickness for furniture backing, from Quercus rubra. Qualifies for 4407.91.0022 as peeled/sliced oak exceeding 6 mm, not further manufactured.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thinner slices under 6mm
Veneer ≤6mm thick moves to 4408.90 sheet/panel wood.
If assembled into layered blocks
Multi-layer oak blocks classify as laminated under 4412.94.
If bamboo-wood composite
Bamboo or woody composites fall under 4407.26 per chapter note.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Confirm slicing method documentation; bundle sizes must not imply further assembly; declare flat rate value excluding installation costs
Related Products under HTS 4407.91.00.22
Red Oak Sawn Lumber 1x6
Red oak lumber sawn lengthwise to nominal 1-inch by 6-inch dimensions, planed and sanded for smoothness, with thickness exceeding 6 mm. Classified under HTS 4407.91.0022 as sawn red oak (Quercus spp.) wood, not further manufactured beyond basic processing.
Planed Red Oak Board 4/4 x 8
Thickness-planed red oak boards in 4/4 quarter-sawn by 8-inch width, exceeding 6 mm thick, used for cabinetry. Fits HTS 4407.91.0022 for oak (Quercus spp.) sawn/planed wood not squared or further profiled.
Sanded Red Oak Planks 2x10
Rough sawn then sanded red oak planks nominal 2x10 inches, thickness over 6 mm, sourced from Quercus species for flooring blanks. HTS 4407.91.0022 covers sliced/peeled/planed oak not exceeding basic end-jointing.
Quartersawn Red Oak Lumber 5/4 x 6
Quartersawn red oak boards at 5/4 thickness by 6 inches wide, sanded surface, over 6 mm for high-end millwork. HTS 4407.91.0022 for sawn/chipped/planed red oak (Quercus spp.).
End-Jointed Red Oak Studs 2x4
Short red oak pieces end-jointed into 2x4 studs, planed faces, thickness >6 mm for framing. Allowed under HTS 4407.91.0022 as basic end-jointed sawn oak lumber.
Red Oak Stair Risers Sawn Rough
Sawn red oak blanks cut to stair riser dimensions, lightly planed, exceeding 6 mm thick from Quercus spp. HTS 4407.91.0022 applies to unfinished sawn/planed oak stock.